KymcoForum.com

General => Technical | How To => Topic started by: Biglee on September 26, 2020, 04:37:22 PM

Title: Engine management light
Post by: Biglee on September 26, 2020, 04:37:22 PM: Hi all on the way home from work I could smell coolent one of the jubilee clips was loose I was less than half a mile from home so carried on so as I pulled up the temp was flashing hot and the engine light came on so I refilled with coolant all was fine but the engine light has stayed on anyone know how to clear it thanks in advance
Title: Re: Engine management light
Post by: CROSSBOLT on September 26, 2020, 05:28:05 PM: Engine light? The warning light that is shaped like an engine profile? Was/is it blinking in dots and dashes? Eliminating that engine light may be done by disconnecting the battery for 30 seconds to 30 minutes.

Model and year of bike and miles, please.
Title: Re: Engine management light
Post by: Biglee on September 26, 2020, 09:10:17 PM: Kymco400i 2015 yes the light that is shaped like an engine not blinking or flashing I turn the scooter on and the engine light mist stays on I have risen it up and down a bit it seems fine
Title: Re: Engine management light
Post by: big blue on September 26, 2020, 09:41:52 PM: Try this procedure to reset, don't worry about the diagnostic cable part just do the procedure.
Title: Re: Engine management light
Post by: Biglee on September 27, 2020, 01:11:42 PM: Hi all tryed the method it worked a treat many thanks
Title: Re: Engine management light
Post by: big blue on September 27, 2020, 04:21:21 PM: ;D ;D ;D
Title: Re: Engine management light
Post by: Neil955i on August 26, 2024, 05:48:12 PM: Quote from: big blue on September 26, 2020, 09:41:52 PM
Try this procedure to reset, don't worry about the diagnostic cable part just do the procedure.

Never imagined that this would work with my new DTX360 when the light stayed on, but guess what? It did!! Delighted Big Blue, thank you.
Title: Re: Engine management light
Post by: big blue on August 28, 2024, 04:32:42 PM: You are very welcome, I posted this a long time ago but it is still helping, That's why this forum is so good!