KymcoForum.com

General => Technical | How To => Topic started by: Moonwreck on August 18, 2020, 05:29:32 PM

Title: Kymco Agility 50 Ignition Fix
Post by: Moonwreck on August 18, 2020, 05:29:32 PM

My Kymco got stolen and the person hot wired the ignition (See picture).Basically the cables are ripped apart and jumbled.

• Any info on how to fix it?
• Do I need to buy parts?
• Is there any place in the internet with a step by step on how to do it? (Youtube videos on the subject are crap)

Thanks

Title: Re: Kymco Agility 50 Ignition Fix
Post by: eamartin on August 18, 2020, 08:00:16 PM

How many wires are there?  What colors are they?

Title: Re: Kymco Agility 50 Ignition Fix
Post by: Moonwreck on August 18, 2020, 08:21:08 PM

On one side there are 4 wires, 3 without the color plastic that ID the wires and one black. On the other side I see 5 wires. 2 green, one red, one black and one half black and half white. I wonder if the picture that I attached is of any help?

Title: Re: Kymco Agility 50 Ignition Fix
Post by: eamartin on August 18, 2020, 11:05:52 PM

https://www.kymcoforum.com/index.php?topic=25412.msg181177#msg181177 (https://www.kymcoforum.com/index.php?topic=25412.msg181177#msg181177)

Go to this thread.  It is not an Agility but if the wires are color-coded the same, this thread may help you figure out in what pattern to re-solder the wires.

Title: Re: Kymco Agility 50 Ignition Fix
Post by: Moonwreck on August 19, 2020, 12:18:42 AM

Thank you, this is helpful.