KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: ScottNicol on October 04, 2010, 04:31:47 PM

Title: Kymco CDI Derestriction.
Post by: ScottNicol on October 04, 2010, 04:31:47 PM

Hi,

I have a Kymco Agility (mid '07) with a CDI (dated APR 2006). I can get more details of the box if you wish, but I don't know if this can be derestricted or not, and what wire I'm looking for. Do newer ones have the small wires to cut, and the older ones have a green one?

I normally do 35mph on straights, without any derestriction I know about. Hopefully be able to get it to a true 40 do you think?

Cheers,
Scott

Title: Re: Kymco CDI Derestriction.
Post by: oswaldters on October 04, 2010, 04:58:40 PM

Welcome to the forum.

There is a ton of material about deresticting the agillity 50 in the past posts - including pictures and all.

I would suggest doing a search of the site (search tab is between the help tag and profile tab) for agility cdi derestricting - or some similiar terms.  

That should give you what you need.

Title: Re: Kymco CDI Derestriction.
Post by: ScottNicol on October 04, 2010, 05:47:55 PM

I've cut into it, just as far as I know, it's a black wire. I'm not entirely sure, as I haven't cut it wide, just a slim cut. I can see some wire bit and I've gone about 5/6mm in already, is that normal?

It's getting dark now, so I will take some pictures in the daylight tomorrow.

EDIT:

I had a 'f' it moment, and just did a bit more cutting and then had a go. Immediately quick. Speedo said 40MPH, with a full tank and in the cold. Mighty impressed!

Thanks for the awesome resources around on this site, I can see some of the modifications coming in handy!

Title: Re: Kymco CDI Derestriction.
Post by: sidthesloth on October 04, 2010, 08:24:24 PM

Congrats on the CDI derestrict, welcome to the forum. Don't forget, that variator/boss drive setup is also holding you back, there is a lot more fun to be had yet. :)

Title: Re: Kymco CDI Derestriction.
Post by: omfgdotcodotuk on October 04, 2010, 08:26:22 PM

lol yeah what sid said,oh and welcome to this great forum :)

Title: Re: Kymco CDI Derestriction.
Post by: ScottNicol on October 04, 2010, 08:29:09 PM

I'll have a look at that this weekend as I have the weekend off. I don't have the tools to do the variator derestriction, but I know someone that might so I'll have to see!

Thanks all!

Title: Re: Kymco CDI Derestriction.
Post by: omfgdotcodotuk on October 04, 2010, 08:35:00 PM

ermmmmmmmmmmmm you dont need special tools check out my previous post on this :)

Title: Re: Kymco CDI Derestriction.
Post by: omfgdotcodotuk on October 04, 2010, 08:37:53 PM

or type in you tube,kymco variator deristriction i think they do it on a super 8 but its exactly the same as yours bud :) been there lol ;)

Title: Re: Kymco CDI Derestriction.
Post by: wordslinger on October 05, 2010, 01:10:48 AM

I had a 'f' it moment, and just did a bit more cutting and then had a go. Immediately quick. Speedo said 40MPH, with a full tank and in the cold. Mighty impressed!


..awesome...

..the seed sprouts and grows from this point...

..i use a pair of vise-grip clamps to hold the drive face...


..and Welcome to th' Forum!!


 ;D

Title: Re: Kymco CDI Derestriction.
Post by: omfgdotcodotuk on October 05, 2010, 09:01:54 PM

Errrmmmm or you could use vice grips lol ;)