KymcoForum.com
General => General Discussion => Topic started by: Stig / Major Tom on July 17, 2020, 11:05:09 AM
-
Noticed 3 large crows join me just overhead for a 1/4 mile this morning on my rural ride out for coffee.
Couldn't help but notice that we were cruising at the exact same speed. Allowing for speedo error -- we were each doing 29 mph.
So, there you go.
Major Tom
PS: IS airspeed the same as ground speed? Or is it something mysterious, like nauts??
-
Noticed 3 large crows join me just overhead for a 1/4 mile this morning on my rural ride out for coffee.
Couldn't help but notice that we were cruising at the exact same speed. Allowing for speedo error -- we were each doing 29 mph.
So, there you go.
Major Tom
PS: IS airspeed the same as ground speed? Or is it something mysterious, like naughts??
Would it have to be the knots equivalent of 29 mph?...
-
Would it have to be the knots equivalent of 29 mph?...
What are you doing up this early?!
Oh, yes....it's like Saturday lunch-time over there ...across from the great nation of France.
Stig
-
And another thing...
If it's "nautical"....why is it 'knots'??
The work of early Kymco owner's manual writers 300 yrs ago??!
Major Tom
-
Would it have to be the knots equivalent of 29 mph?...
25.2003 knots
-
And another thing...
If it's "nautical"....why is it 'knots'??
The work of early Kymco owner's manual writers 300 yrs ago??!
Major Tom
The speed unit of knots was created when in the days of old a float tied to a line with evenly spaced knots down its length would be pitched over the stern of a vessel. For a given time interval the knots would be counted as they slipped over the stern rail. I wish the whole world was metric, it could make a lot of conversions easier.
-
And another thing...
If it's "nautical"....why is it 'knots'??
The work of early Kymco owner's manual writers 300 yrs ago??!
Major Tom
If they did when a cargo hatch was open did a little candle light up with (MET IN)
-
The speed unit of knots was created when in the days of old a float tied to a line with evenly spaced knots down its length would be pitched over the stern of a vessel. For a given time interval the knots would be counted as they slipped over the stern rail. I wish the whole world was metric, it could make a lot of conversions easier.
Yeah, the USA is the odd man out (with two other countries) on metric. The USA did attempt to go metric in 1975 but ran into to much resistance.
-
Sorry.
nope I do not believe they tied a knot every 1.15 miles on a piece of rope ….and counted them as they went by.
Hellsbells Home Depot didn't even sell rope that long in those days. Nobody had invented the "long rope" yet.
Cowboys had NO need to lasso cows in the next county.
If you couldn't see 'em ….you didn't have no need to mess with 'em.
Itsa fakt.
Major T.
You don't get to be a Hero Member and not know this stuff.
My certificate is right there on the wall above the box of stripped screws and Chinese fuel pumps.
-
Even more puzzling is why aircraft use knots, who counts the knots at Mach 3? Retired Blackbird SR-71 about 30 miles from my house..
-
Started summat here didn’t I? [emoji23]
Sent from my iPhone using Tapatalk
-
Yeah, the USA is the odd man out (with two other countries) on metric. The USA did attempt to go metric in 1975 but ran into to much resistance.
I heard that failed because the boys in the federal penitentiaries only had boxes full of numerals too large to fit 3 on the DOT signs..
Thus the USA was about to receive a top speed of 99KPH, nationwide! (less than 62mph)
This is straight from Large Alice, my Sister-in-law's ex-husband - the last time she went for visitation.
Stig
-
And another thing...
If it's "nautical"....why is it 'knots'??
The work of early Kymco owner's manual writers 300 yrs ago??!
Major Tom
cause at one time, they fed a rope behind the ship, that had knots tied in it, they counted the knots