KymcoForum.com

General => Technical | How To => Topic started by: Longanthony on March 29, 2020, 01:59:02 AM

Title: Derestricting the 150 4 wheeler
Post by: Longanthony on March 29, 2020, 01:59:02 AM

I tried using the search features on this forum excuse me as Im new too forums, I'm trying to figure out how to derestrict the 150cc four wheeler? Thanks

Title: Re: Derestricting the 150 4 wheeler
Post by: Stig / Major Tom on March 29, 2020, 03:45:02 AM

I thought only 50cc engined scooters were speed restricted.
Do you mean aftermarket speed parts for your 150?
Stig

Title: Re: Derestricting the 150 4 wheeler
Post by: souzamoto on March 29, 2020, 05:48:49 AM

What year is you MXU150?

Also, Stig, Kymco chose to speed restriction the 150 and 270 ATV’s so that they would be legal so sell to a younger age bracket. Currently dealers can only sell a 50cc ATV to the intended rider aged 6 to 12 years old, a 90cc to a 12 to 16 year old and a 16 year old and over can ride any size ATV. By restricting the 270cc it can be sold to a 14 year old and the 90 can be sold to a 10 year old. The 150 can be sold to a 12 year old intended rider.

Title: Re: Derestricting the 150 4 wheeler
Post by: Longanthony on March 29, 2020, 03:30:45 PM

Do you know how or do you have information on how to derestrict the 150?

Title: Re: Derestricting the 150 4 wheeler
Post by: Longanthony on March 29, 2020, 03:32:03 PM

Mine is 2009

Title: Re: Derestricting the 150 4 wheeler
Post by: souzamoto on March 30, 2020, 03:09:45 PM

The boss drive. It either has the removable rings or the boss has to be replaced. Looking at the parts diagram the 2009 may not have been restricted at all in the clutch. Although, you may want to try drive boss # 22105-LLB1-900 as it may be different that whats in your 2009, no guarantees though, it may be the same. I know of no restrictions in the CDI
CJS

Title: Re: Derestricting the 150 4 wheeler
Post by: Longanthony on March 31, 2020, 01:27:41 PM

I also noticed that this 2009 has a rev limiter, could you show me what the Rings look like that would need to be removed if they were there?

Title: Re: Derestricting the 150 4 wheeler
Post by: souzamoto on March 31, 2020, 02:54:02 PM

Attached is the microfiche for the front clutch of the 2009 MXU150. It has no restriction rings. The ring would be in the area of the boss drive #22105. To be exactly sure what year your atv is I would need the VIN. That way I can enter the VIN into the Kymco system, that will take me to the exact Fiche for your atv.

Title: Re: Derestricting the 150 4 wheeler
Post by: Longanthony on April 02, 2020, 12:38:34 PM

Thank you, I took the primary boss apart and found spacers I took them out and am probably getting close too 40mph.thanks guys.