KymcoForum.com
General => Technical | How To => Topic started by: kennygoh016 on October 01, 2019, 03:53:12 AM
-
I posted in super8 150 section but didn't get an answer. Sorry for posting this again.
______________________________________________________________________________________
Does anyone know the model of the starter button of super 8 150R 2015? Or where to find a generic one?
This one on amazon looks similar but not sure whether it'll fit.
https://www.amazon.com/DELUXEMOTO-Universal-Handlebar-Starter-Motorcycle/dp/B0738R988P/ref=asc_df_B0738R988P/?tag=hyprod-20&linkCode=df0&hvadid=241970175828&hvpos=1o2&hvnetw=g&hvrand=11841288454621187701&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9030253&hvtargid=pla-570109294768&psc=1 (https://www.amazon.com/DELUXEMOTO-Universal-Handlebar-Starter-Motorcycle/dp/B0738R988P/ref=asc_df_B0738R988P/?tag=hyprod-20&linkCode=df0&hvadid=241970175828&hvpos=1o2&hvnetw=g&hvrand=11841288454621187701&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9030253&hvtargid=pla-570109294768&psc=1)
I wanted to replace the starter button because my scooter won't start. For a while I had to press the button really hard to start the scooter. So I think maybe I should replace the starter button.
Thanks.
-
One of the reasons there is no response is there has been apparently no testing done to reveal the start button is the problem. It may be but how did you decide that?
-
the starter may get a little corrosion on it then its a pain.
Disassemble clean contact point and coat lightly with dielectric grease.
-
the starter may get a little corrosion on it then its a pain.
Disassemble clean contact point and coat lightly with dielectric grease.
And do the same for the starter relay...