KymcoForum.com

Scooters - 50cc => Like 50 2T => Topic started by: Ajayprasad on September 09, 2019, 03:42:10 AM

Title: Gear shaft?
Post by: Ajayprasad on September 09, 2019, 03:42:10 AM

So I did this...

I'm trying to 1) get the nut off. I guess I have to repeat PB buster and heat repeatedly. I acquired a torque wrench but the instructions advise not to loosen fasteners. or 2) I'm going to cut the rest of it off. There in lies the question, going off of

https://www.oemmotorparts.com/oem5.asp?M=Kymco&T=LIKE%2050&Y=_&L=KYMCO_LIKE%2050&O=Transmission&F=KYMCO_LIKE%2050_Transmission&L2=KYMCO_LIKE%2050_Transmission (https://www.oemmotorparts.com/oem5.asp?M=Kymco&T=LIKE%2050&Y=_&L=KYMCO_LIKE%2050&O=Transmission&F=KYMCO_LIKE%2050_Transmission&L2=KYMCO_LIKE%2050_Transmission)

Is it the final drive 23431 or the shaft drive 23411? I just want to find the part because I'll have to wait forever  :'(

Thank you

Title: Re: Gear shaft?
Post by: Ajayprasad on September 09, 2019, 03:55:31 AM

.

Title: Re: Gear shaft?
Post by: big blue on September 10, 2019, 04:20:51 PM

I believe that the shaft that takes drive from the clutch is 23431 the other shaft has the splines for the wheel mounting.

Title: Re: Gear shaft?
Post by: JJJoseph on October 04, 2019, 04:12:54 AM

Quote from: Ajayprasad on September 09, 2019, 03:42:10 AM

I'm trying to 1) get the nut off. I guess I have to repeat PB buster and heat repeatedly.

Don't cut or drill or heat anything!  The nut comes off easily with the right socket.

Title: Re: Gear shaft?
Post by: Ajayprasad on October 04, 2019, 08:44:27 AM

Too late now. It's already been replaced. That was my first method. I could very well be wrong but it was not coming off with the correct socket. It generated so much torque the contra spring expanded.