KymcoForum.com

General => Technical | How To => Topic started by: glopezz05 on September 13, 2010, 10:19:16 PM

Title: UNI Filter with modded location
Post by: glopezz05 on September 13, 2010, 10:19:16 PM

Typically I've seen the UNI or othery open filters attached directly to the carb...

I remembered I still had the old air box and got to cutting it with my knife... 

results in the pic...

Hoping to get some cooler air out there.  We'll see how it goes.

the intake noise is now directed out the side of the scoot instead of up and back.

Title: Re: UNI Filter with modded location
Post by: glopezz05 on September 13, 2010, 10:20:28 PM

filter shows a little more on the port side of the scoot.

Title: Re: UNI Filter with modded location
Post by: mrrmutt on September 14, 2010, 04:32:13 PM

Nice.
I think thats the next thing I'll do to my People 150.

Title: Re: UNI Filter with modded location
Post by: glopezz05 on September 14, 2010, 05:24:06 PM

I seem to have lost the sluggish hard starting in the morning with this mod.

I think it may have to to with reduced airflow.

I haven't put a bigger jet on, just slightly modded the old one, so not running as lean...

Title: Re: UNI Filter with modded location
Post by: asources on June 21, 2011, 05:21:24 PM

Quote from: glopezz05 on September 13, 2010, 10:19:16 PM

Typically I've seen the UNI or othery open filters attached directly to the carb...

I remembered I still had the old air box and got to cutting it with my knife... 

results in the pic...

Hoping to get some cooler air out there.  We'll see how it goes.

the intake noise is now directed out the side of the scoot instead of up and back.

What is the size you use ... 35MM or 38MM

Stefan