KymcoForum.com

General => Technical | How To => Topic started by: Biglee on May 12, 2019, 08:22:45 PM

Title: Dash cams
Post by: Biglee on May 12, 2019, 08:22:45 PM

Hi all has a body fitted a dashcam front a d rear to there scooters  if so could you tell me which wires you used for the live and earth as I think king of fitting one myself thznks

Title: Re: Dash cams
Post by: CROSSBOLT on May 12, 2019, 10:29:51 PM

Really great idea! Which bike? What year?

Title: Re: Dash cams
Post by: Biglee on May 24, 2019, 11:59:08 PM

400i 2015 i was going to  use the earth from the battery and then remove the 10amp fuse put  the live in that space and put the fuse back in as the 10 amp is the ignition it should go on and off when the bike is started and switched off

Title: Re: Dash cams
Post by: CROSSBOLT on May 25, 2019, 12:14:02 AM

You may want to use a 1/4" spade piggy back for your connection at that 10 amp fuse. Good idea.