KymcoForum.com

Offroad => MXU => Topic started by: TonyD on March 08, 2019, 02:21:37 PM

Title: MXU 150 - No brake lever
Post by: TonyD on March 08, 2019, 02:21:37 PM

Hi All, just installed a new brake caliper on MXU 150, new brake fluid and bled the system, but the brake lever comes all the way back - no brakes. The fluid is appearing in the tube from the caliper but will not fully discharge into the container. Any ides guys, your help is appreciated. Regards Tony

Title: Re: MXU 150 - No brake lever
Post by: CROSSBOLT on March 08, 2019, 03:20:04 PM

Massive air in system. Keep reservoir full and keep pumping. Or fill and bleed from botton. PITA either way....

Title: Re: MXU 150 - No brake lever
Post by: souzamoto on March 08, 2019, 04:42:20 PM

Invest in a "Mightyvac"
Problem solved
CJS

Title: Re: MXU 150 - No brake lever
Post by: TonyD on March 09, 2019, 07:35:01 AM

Thanks guys for your help.