KymcoForum.com
Scooters - 50cc => People 50 => Topic started by: TrashPanda4life on December 16, 2018, 02:39:46 AM
-
So I have a blown taillight, I pull the two screws and try to pry the red cover off, and it looks like the sliver plastic of the casing is going to give before the cover comes loose. Like every other piece of plastic on the bike I'm sure there are tabs the service manual isn't bothering to tell me about. I just don't want to f*** up the casing finding, aka breaking, those tabs. So if anyone could direct me I would be most appreciative.
-
If anyone else runs into this problem. There are no tabs just the rubber gasket is stuck. I used a little bitty screwdriver in one of the screw holes to get it free.
-
If anyone else runs into this problem. There are no tabs just the rubber gasket is stuck. I used a little bitty screwdriver in one of the screw holes to get it free.
Hey, a big thank you! for giving us the fix for this problem.
Really appreciate that you reported back on this.....stuff like this are the meat & taters of a vehicle forum!
And Merry Christmas to you!
Stig