KymcoForum.com

General => Technical | How To => Topic started by: Togger on August 02, 2018, 06:17:47 PM

Title: Trying to get transmission oil into B&W 250
Post by: Togger on August 02, 2018, 06:17:47 PM

I'm trying to put new trans oil into this scooter but the hole is very hard to get to. Is there a good tool or secret to getting the oil injected into this hole, because there is another trans part over hanging the hole which makes it tough.

Title: Re: Trying to get transmission oil into B&W 250
Post by: vespbretta on August 02, 2018, 08:13:38 PM

How about a 60ml-100ml syringe with hose?
That´s the tool most of us use for this job.  ;) :)

Title: Re: Trying to get transmission oil into B&W 250
Post by: hypophthalmus on August 03, 2018, 07:59:54 PM

At the Walmarts around here, there's a syringe for mixing two stroke oil that's good for this.