KymcoForum.com

General => Technical | How To => Topic started by: Togger on July 30, 2018, 04:37:24 PM

Title: Adjusting Valves on B&W 250
Post by: Togger on July 30, 2018, 04:37:24 PM

Has anyone done this in this forum? Am I going to have to take the entire scooter apart to do this? One time I changed the spark plug and had to take the seat, metin box and a bunch of bodywork just to get to it.

Title: Re: Adjusting Valves on B&W 250
Post by: Snoopzilla on July 31, 2018, 01:50:22 AM

Got to take whatever is in the way of the head.  Not super familiar with the bet and win, but most scoots usually it’s just that panel in front by where your feet sit and maybe the underseat bucket. 


Sent from my iPhone using Tapatalk

Title: Re: Adjusting Valves on B&W 250
Post by: Stig / Major Tom on July 31, 2018, 02:00:10 AM

No help here - but the poor Honda PCX owners have to start removing from the tail light and forward to get to the valve cover!
(Hence - "I think my valves are just fine!" is their motto)

Stig

Title: Re: Adjusting Valves on B&W 250
Post by: hypophthalmus on July 31, 2018, 05:58:48 PM

Also not super familiar with the Bet and Win. But I expect you'll need to repeat what you did when you changed the spark plug.

That's also how it was on my People 250.