KymcoForum.com
General => General Discussion => Topic started by: Stig / Major Tom on July 26, 2018, 11:35:56 AM
-
I imagine that the new LIKE150i ABS is shod with Kenda tires again.....or maybe they went with Maxxis this time?
I would love to see comparison wet braking tests run with this budget* scooter's two wheel ABS using the Kendas vs Michelin City Grip tires.
Testing for wet stopping distances and control - how effective is ABS when using nylon tires vs rubber/blend tires? Some of us have experienced the thrill of Kendas in the wet during hard braking!#
Also, would be interested to see the same tests run on the non ABS LIKE200I.
*surely the Like150I is the lowest priced two channel ABS scooter in N. America?
#I only commuted in the wet on Kenda tires for a very short time , before installing CG's.
Stig
-
Kenda's in the wet, yeah; thrilling like Action Park!
https://www.buzzfeed.com/danm3/35-horror-stories-that-prove-action-park-was-the-6wr?utm_term=.yhmA8wm5oZ#.cazE1wRD2z (https://www.buzzfeed.com/danm3/35-horror-stories-that-prove-action-park-was-the-6wr?utm_term=.yhmA8wm5oZ#.cazE1wRD2z)
I can't wait for my new city grips to be mounted next week.
Jon
-
Hey Stig,
When I get the City Grips mounted, besides the breaks, is there anything else I should ask the mechanics to take a look at?
Jon
-
Hey Stig,
When I get the City Grips mounted, besides the breaks, is there anything else I should ask the mechanics to take a look at?
Jon
I agree that street-side DIY servicing is out - so, yeah check your brake pad thickness and air filter cleanliness (though both should be fine at your mileage), do a gear oil change, install the Iridium plug. Take it easy on the new tires to scrub them in.
Ask them about experience with valve clearance checks on LIKE200i's, as this might be your biggest service charge. ....some say if idles and starts easily and not clicking - valves are fine. Us DIY guys would be doing a valve check at your mileage....but we rarely find anything wrong.
Stig
If you ride at night - the headlight is not much to brag about - but things can be improved by adjusting the aim less into the distance and more down in front of the scooter. A screw is under the headlight in the plastic - no need to remove anything. Screw it IN to lower the beam, out to raise the beam.
-
I imagine that the new LIKE150i ABS is shod with Kenda tires again.....or maybe they went with Maxxis this time?
I would love to see comparison wet braking tests run with this budget* scooter's two wheel ABS using the Kendas vs Michelin City Grip tires.
Testing for wet stopping distances and control - how effective is ABS when using nylon tires vs rubber/blend tires? Some of us have experienced the thrill of Kendas in the wet during hard braking!#
Also, would be interested to see the same tests run on the non ABS LIKE200I.
*surely the Like150I is the lowest priced two channel ABS scooter in N. America?
#I only commuted in the wet on Kenda tires for a very short time , before installing CG's.
Stig
Can confirm my Like 150i has kendas and has to be lowest priced two channel abs scoot.
-
Stig,
I get the driveway to work sometimes, so things like gear oil and and air filter, I have already changed. Head light, tail light and running lights on fairing I have also changed to all LED (big improvement and highly recommended) as well as adding LED strip to the top box. I'll do the plug myself and as for the valve clearance I'll do it myself but I don't know much about it, so I'll ask questions before I intend to have the seat and front panel off for the spark plug install. Probably first or second week of August.
I don't want to pay for work I can do in a primarily standing position, these guy come at like $80+ an hour so the tune up stuff is up to me, I just lack the kit to lift the bike, and balance the tires and figured I should have the breaks checked while the wheels are off.
Jon
-
I imagine that the new LIKE150i ABS is shod with Kenda tires again.....or maybe they went with Maxxis this time?
Hey Stig, did your Piaggio come with Maxxis? Mine Medley has them and I was wondering if yours did as well. So far so good with them but I might change them over to a better sticky tyre for winter next year.
-
Hey Stig, did your Piaggio come with Maxxis? Mine Medley has them and I was wondering if yours did as well. So far so good with them but I might change them over to a better sticky tyre for winter next year.
Yes Maxxix, but unless my cell phone weather app fails me I never plan to ride that little beauty in the wet!
That is when I take the LIKE200i with the Michelins!
But, yeah, the Liberty's next tires will be City Grips - good tires and they last a long time on my LIKE.
Stig
-
Stig,
I get the driveway to work sometimes, so things like gear oil and and air filter, I have already changed. Head light, tail light and running lights on fairing I have also changed to all LED (big improvement and highly recommended) as well as adding LED strip to the top box. I'll do the plug myself and as for the valve clearance I'll do it myself but I don't know much about it, so I'll ask questions before I intend to have the seat and front panel off for the spark plug install. Probably first or second week of August.
I don't want to pay for work I can do in a primarily standing position, these guy come at like $80+ an hour so the tune up stuff is up to me, I just lack the kit to lift the bike, and balance the tires and figured I should have the breaks checked while the wheels are off.
Jon
Good for you!
A LIKE200i valve adj. walk thru I did a while back.
http://www.kymcoforum.com/index.php?topic=11948.msg119604#msg119604 (http://www.kymcoforum.com/index.php?topic=11948.msg119604#msg119604)
and another...
http://www.kymcoforum.com/index.php?topic=13135.msg131058#msg131058 (http://www.kymcoforum.com/index.php?topic=13135.msg131058#msg131058)
You are experienced with your scooter - but for safety I will add this : make certain you feel a little up/down movement in the rocker arm when you grab the adjusting nut & screw. This insures that when the chain sprocket is aligned properly you are indeed at top-dead-center on the compression stroke!
We had a member get it all sideways when he performed a valve adjustment on the wrong stroke! He forgot to check for rocker arm movement.
Stig
Stig
-
Thanks Stig.
-
Stig,
I get the driveway to work sometimes, so things like gear oil and and air filter, I have already changed. Head light, tail light and running lights on fairing I have also changed to all LED (big improvement and highly recommended) as well as adding LED strip to the top box. I'll do the plug myself and as for the valve clearance I'll do it myself but I don't know much about it, so I'll ask questions before I intend to have the seat and front panel off for the spark plug install. Probably first or second week of August.
I don't want to pay for work I can do in a primarily standing position, these guy come at like $80+ an hour so the tune up stuff is up to me, I just lack the kit to lift the bike, and balance the tires and figured I should have the breaks checked while the wheels are off.
Jon
Hello Jon, any chance you can post a DIY on the LEDs you've installed on your LIKE200i?
Bulbs you used? etc.
Or, if not, some photos of them lit up?
Lots of folks have talked about adding LEDs to the LIKE.
Stig
-
I imagine that the new LIKE150i ABS is shod with Kenda tires again.....or maybe they went with Maxxis this time?
I would love to see comparison wet braking tests run with this budget* scooter's two wheel ABS using the Kendas vs Michelin City Grip tires.
Testing for wet stopping distances and control - how effective is ABS when using nylon tires vs rubber/blend tires? Some of us have experienced the thrill of Kendas in the wet during hard braking!#
Also, would be interested to see the same tests run on the non ABS LIKE200I.
*surely the Like150I is the lowest priced two channel ABS scooter in N. America?
#I only commuted in the wet on Kenda tires for a very short time , before installing CG's.
Stig
Actually I take that back my Like 150i does not even have Kendas! WTF!?!? Cheng Shin tires!?!?! What the hell are these? Never heard of this brand... oh ok after doing some research I guess maxxis is just cheng shin tires “rebranded†since maxxis apperenty sounds better.
-
Some nitpicking:
The tread on tires is always rubber. The structural cords can be nylon or polyester, but I'm not aware of any advantage of one over the other. The quality of the rubber is what makes the difference for traction. The only time I've seen purely nylon tires was on my hand pulled garden cart.
I think the wet ABS braking distance would be a very interesting test though.
-
I cannot speak with knowledge -- but we have Continentals, 3 kinds of Michelins, Pirelli, Kenda and Maxxis scooter & motorcycle tires.
Only the Maxxis and Kenda tires are marked "NYLON", none of the others speak to the tire substance. (some say RADIAL, others don't )
Stig
-
Wouldn’t it be nice if scooter tires were tested and given standardized grades like automobile tires? That way we could do a more direct comparison. —- treadwear, traction, and speed ratings are all standardized on car tires. They aren’t exact. But they give us a good starting point rather than simply flying bind .
Sent from my iPad using Tapatalk
-
I think the Pirelli diablos I used said nylon, and the Michelin city grips said polyester. On my car tires, it says nylon, steel and polyester, and also lists how many plies of each. All referring to the structural fibers. I'm not actually sure what you would do with this information.
Motorcycles have speed ratings as well. What's this about standardized traction and wear ratings though?
-
Answering my own question:
I didn't see anything at first on my tires, but then I searched for information and came across this:
https://info.kaltire.com/utqg-ratings/
I found it now above the size information, and I'm not sure how I ever missed it. Apparently the traction rating is based on a wet stopping test. Motorcycles should definitely have this.
-
Answering my own question:
I didn't see anything at first on my tires, but then I searched for information and came across this:
https://info.kaltire.com/utqg-ratings/
I found it now above the size information, and I'm not sure how I ever missed it. Apparently the traction rating is based on a wet stopping test. Motorcycles should definitely have this.
Exactly! Tread wear gives a relative comparison. That way we could get an idea of how long they’d last compared to what we have. Speed ratings would be nice too since some Scooters can exceed 90 mph. It would be nice to know if the tire was rated for that speed. And wet traction is a VERY useful rating since some tires are nearly useless on wet pavement. It would certainly be easier than word of mouth since each person drives differently.
Sent from my iPad using Tapatalk
-
Answering my own question:
I didn't see anything at first on my tires, but then I searched for information and came across this:
https://info.kaltire.com/utqg-ratings/
I found it now above the size information, and I'm not sure how I ever missed it. Apparently the traction rating is based on a wet stopping test. Motorcycles should definitely have this.
Used that info all the time when buying car tires.....then discovered that it may be a mute point if the dang thing rides like it's made from wood.
So, it's Michelin for me and mine out the door.....
Stig
-
Used that info all the time when buying car tires.....then discovered that it may be a mute point if the dang thing rides like it's made from wood.
So, it's Michelin for me and mine out the door.....
Stig
True. The ratings aren’t perfect. But they are a good starting point. But they would be perfect for comparing tires such as City Grips vs power pure. The question for me was this. Power pure said they had long life center tread. But is that long life in comparison to soft tread tires or just as long as the City grips? A lot of anecdotal stories. But a standardized test would be great. I had both. Both rode well. But I didn’t have the power pure long enough to asses tread life. My Majesty was totaled at 3k miles. But I knew I didn’t like the ride of those oe tires. But they SEEMED to be wearing ok.
Sent from my iPad using Tapatalk
-
You can bet on me hollaring about wear on PP SC Michelins, Forbes! Only have about 3000 miles on mine....
-
You can bet on me hollaring about wear on PP SC Michelins, Forbes! Only have about 3000 miles on mine....
Hey I'm doing it extra scientifically - I'm running a 5 yr old City Grip on the front of my LIKE200i. ..and a Power Pure on the rear.
'Course the Power Pure spotted the City Grip a 13,600 mile head start in the wear contest.
I'll let y'all know if the PP craps out before the City Grip!
Stig
-
Hello Jon, any chance you can post a DIY on the LEDs you've installed on your LIKE200i?
Bulbs you used? etc.
Or, if not, some photos of them lit up?
Lots of folks have talked about adding LEDs to the LIKE.
Stig
-
Stig,
So I don't have a DIY on the LED upgrade, but your break fluid photos are a good start for the headlight, I used a plastic/nylon spakle tool instead of the pizza wheel. Pretty self explanatory once you get the dash off, it's really just a wire clip to hold the lamp in the reflector body in place with a couple of screws but be careful not to drop a washer into the body of the scooter as I did, I had to cobble something up to make it work as a result. I used a "CREE XPH-50" with a H7 base (three prong) as the replacement. Big improvement!
As for the running lights in the fairing, they can be accessed through the glove box but and are somewhat frustrating to install as you almost have to dislocate your wrist to install them, it took a lot of trial and patience for me to accomplish. The Lamps used are a T10 base and the brand I purchased was "Yorkim", no trouble yet and added bonus the same lamp can be used for the license plate light replacement.
As for the tail light, top box and rear directionals I would suggest other readers to check out your DIY on your top box install, as that is where I learned how to do it and it's very through. Everything back there is behind that plastic panel in the wheel well.
As far as kit I used "JDM ASTAR Extremely Bright PX Chipset 1157 LED Lamp Brilliant Red" for the tail light and it has a very good differentiation between break and running light, much brighter when breaking.
And finely for the top box I used "Wiipro Universal LED Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle" super fine wires (break out the soldering iron) and very cheap, but it's fairly bright and I have be happy with it so far.
Hope that helps, and thanks for all the help you have shared.
Jon
-
Stig,
So I don't have a DIY on the LED upgrade, but your break fluid photos are a good start for the headlight, I used a plastic/nylon spakle tool instead of the pizza wheel. Pretty self explanatory once you get the dash off, it's really just a wire clip to hold the lamp in the reflector body in place with a couple of screws but be careful not to drop a washer into the body of the scooter as I did, I had to cobble something up to make it work as a result. I used a "CREE XPH-50" with a H7 base (three prong) as the replacement. Big improvement!
As for the running lights in the fairing, they can be accessed through the glove box but and are somewhat frustrating to install as you almost have to dislocate your wrist to install them, it took a lot of trial and patience for me to accomplish. The Lamps used are a T10 base and the brand I purchased was "Yorkim", no trouble yet and added bonus the same lamp can be used for the license plate light replacement.
As for the tail light, top box and rear directionals I would suggest other readers to check out your DIY on your top box install, as that is where I learned how to do it and it's very through. Everything back there is behind that plastic panel in the wheel well.
As far as kit I used "JDM ASTAR Extremely Bright PX Chipset 1157 LED Lamp Brilliant Red" for the tail light and it has a very good differentiation between break and running light, much brighter when breaking.
And finely for the top box I used "Wiipro Universal LED Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle" super fine wires (break out the soldering iron) and very cheap, but it's fairly bright and I have be happy with it so far.
Hope that helps, and thanks for all the help you have shared.
Jon
Thanks for the LED info!
Here's my Bestem 929 top case - comes with these LEDs installed - just attach wires to tail light wires.
Running lights:
(https://s33.postimg.cc/atqk4cb3z/P1050898.jpg)
When brake applied - bottom row doubles & top portion also lights:
(https://s33.postimg.cc/qvt3abq4f/P1050901.jpg)
To get this type set-up on my Piaggio - it would cost $300 for the Piaggio case, $110 for mounting, $85 for light kit. (@$500 !!)
Fully lighted Bestem case was $120, and comes with mounting kit!
As for the front running lights - I had best luck turning wheel to side and reaching up under the front cowl.
I will take a look at that CREE headlight. The LIKE200i has a 35/35W bulb, my little Piaggio a 60/55W bulb - BIG difference1
Thanks again - you might want to re-post your info on the LIKE200i section for all those wanting to do LEDs.
Stig
-
Ok, will do, also, and I might just be overlooking something simple, but I'm not sure how to properly use and respond with the "quote" function on this forum, perhaps I need a DIY on that, hehe.
Jon
P.S. I apologize, I suppose I got a bit off topic for a tire post.
-
I will say for a tire I never have heard of, the cst tires that come on the Like 150i have impressed me thus far. Just took it out in the rain to see what she can do and I never lost confidence. Don’t get me wrong I won’t be replacing them with another set. But I am in no hurry to throw the Michelin’s on right away.
-
It could be that I'm not sensitive to subtle differences in handling, but my experience in losing traction in the rain is that it happens suddenly and dramatically. The point of the better tires is to push where that happens further down.
-
It could be that I'm not sensitive to subtle differences in handling, but my experience in losing traction in the rain is that it happens suddenly and dramatically. The point of the better tires is to push where that happens further down.
I guess I forgot to mention I don’t really ever ride in the rain and considering I have ABS as well now, I will wear these tires out Instead of replacing them right away. I actually like these cst’s a lot more then the Kenda’s I had on my last scoot, although it’s kind of a hard comparison since this new scooter handles a lot better and different beast altogether.