KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: 118118 on July 20, 2018, 08:47:09 PM

Title: Kymco City 125 rear bulb replacement?
Post by: 118118 on July 20, 2018, 08:47:09 PM

I'm replacing the indicator bulbs on my city 125 (2014) for LED ones. I'm trying to remove the rear light lens to get to the bulbs. I've removed the 6 screws that hold the Lens but it's still tight. It may just be stuck to the seal but i don't want to force it if there is something else holding it.
Any ideas? ???

Title: Re: Kymco City 125 rear bulb replacement? SORTED
Post by: 118118 on July 22, 2018, 11:51:18 AM

All sorted. The rear light lens has obviously never been removed and it was just stuck with the foam seal. A bit of wiggling and extra force and it came away  :)
One thing to note: the front indicator/winker bulbs are different to the rear.
Fronts are a clear bulbs with opposed pins
Rears are Yellow bulbs with offset pins

Now just waiting for the LED relay to arrive to stop the double speed flashing  ;)

Title: Re: Kymco City 125 rear bulb replacement?
Post by: CROSSBOLT on July 22, 2018, 08:09:12 PM

You had to answer your own question 'cause none of us knew!