KymcoForum.com
Motorcycles => Venox 250 => Topic started by: brichant on July 08, 2018, 05:07:20 AM
-
How compatible with the Honda Magna 250 are our Venox's? I'm having a tough time locating a countershaft seal but I have the Honda part number for the Magna and they are both 34x52x9. Any help would be appreciated.
-
The part number you quoted are the dimensions of the seal: inside, outside and thickness, not necessarily in order.
-
Thank you, Crossbolt. I was aware of that. The Kymco number is 91022-KED9-900 and the Honda number for the VT250C is 91205-KT7-003. Both seals are listing the same dimensions that you pointed out so I'm hoping they're the same seal.
-
Hopefully you should be fine if the part numbers match. Good Call on going for a genuine Honda seal!
-
Is there anything written on the seal that you can look up?
The dimensions are the most important thing for compatability. I seem to recall that there might be other features in these seals that might vary, but it's been a while. But like bolts, they aren't brand specific.
-
If there is something written on it, I would look that up on ebay (or something) instead of buying a brand name seal. I think there might be cross compatible markings as well; if so there's probably some kind of table somewhere.