KymcoForum.com
General => Technical | How To => Topic started by: WilliamScooter on May 31, 2018, 04:22:56 AM
-
Hello dear readers :)
I need to replace the belt on my 2008 Kymco Agility.
I've read online conflicting information with regards to actual measurements of the belt.
I've contacted a few belt manufacturers and they tell me that I need to tell them the measurements as the only number that is printed on my old belt (23100 KEC4 9000) does not help them to find correct belt size.
Does anyone know for certain the correct belt size for my scooter?
Thanks in Advance,
William
-
Belts are a pain to find by measurement - can you just get one off an eBay selling selling a belt for a 2008 Agility 125? They should have it right, you'd hope!
-
Viper:
Been doing some research, looks like it's a 781x20x30x9.5
Most of the one's that state my model number are overseas and I need one rather urgent....
If I know the measurements, then my chances of buying one locally are quite good.
It appears that the measurements I just mentioned are correct....but still looking for feedback if anyone knows "for sure"....
-
This site is a great site with lots of knowledge for me to learn.
-
Got my Mitsuboshi belt yesterday. On the picture you can see all the models it fits.(https://uploads.tapatalk-cdn.com/20180620/34c489432a2dcc2e6a1deb6d1c362fe9.jpg)
-
Here are two sites:
https://www.aliexpress.com/item/OEM-quality-23100-KEC4-9000-kymco-motorcycle-transmission-belt/32617364457.html (https://www.aliexpress.com/item/OEM-quality-23100-KEC4-9000-kymco-motorcycle-transmission-belt/32617364457.html)
https://www.ebay.com/i/152939270261?chn=ps (https://www.ebay.com/i/152939270261?chn=ps)
Good Luck!
-
Ability 125 belt is $44 from Kymco parts supplier.
This is a KYMCO part.
From Kymcopartsmonster.com
Would not trust any other brand of belt. Kymco puts good belts on all of their products!
Stig
-
Stig,
I apologize if I broke the rules on listing other vendors...I'm still learning. =)
-
Stig,
I apologize if I broke the rules on listing other vendors...I'm still learning. =)
No, no - any vendor is a help - but experience with many "fits all these Kymcos" has proven problematic too many times. Plus, other brands of belts can be slightly wrong sized, causing scoot to perform differently.
Quickest way to get correct belt size on first try is to buy from a Kymco parts house. There are a few.
His part #, which he couldn't match, was spot-on at monsterparts.
Stig
-
Sorry for replying late, but better late, than never.
It in the end it appears that it was not the belt after all as we had a really good look at it and it doesn't look worn and the symptoms I'm getting now are loss of power, not revving etc. I will post a new thread.
Thank You kindly for everyone who contributed with feedbacks, much appreciated.