KymcoForum.com

General => Technical | How To => Topic started by: Stig / Major Tom on May 23, 2018, 04:45:02 PM

Title: oil changes onto center stand #@&*!
Post by: Stig / Major Tom on May 23, 2018, 04:45:02 PM

Today, as I was lazing there on my exercise matt trying to figure a way to keep the oil from draining again on my Piaggio's center stand...I had a divulgence!
(no, not that - already used the rest room)
Everything wants to drain right on the center stand, but...

"Who's to stop me if I fold up the center stand, put the scoot on the side stand and then put the drain pan right here!", I divulged to myself.


So, I did.
Sat on the upright scooter with coffee, for the final drain.
No mess to clean up.
(https://s7.postimg.cc/keksxtpxn/aaacda.jpg)


Also - wish the pizza boys had given me more than #2 pencil-sized fill hole.

Still getting used to an oil bottle that is not a Qt., but a liter.
Stig

Title: Re: oil changes onto center stand #@&*!
Post by: Viper254 on May 24, 2018, 07:57:14 AM

Spin on filter! That's a proper design - much better than the thimble filter for sure