KymcoForum.com
General => Technical | How To => Topic started by: jbcinzio on July 23, 2010, 10:01:18 PM
-
Hi all.
Do any of you highly knowledgeable scoooternuts know where I can get my hands an an aftermarket sleeper-style exhaust for my Like 50 4T?
All I have found so far on ebay is a "Double-Back" type system with a big lairy expansion chamber and carbonfibre muffler....
I would love one that looks like Daywot's (ebay seller) "V8 Exhaust", but he has told me it is for 2 stroke engines only and that it won't work very well with my 4 stroke :'(
I really really want to get an exhaust that flows better and looks as stock as possible.
Any feedback will be welcomed and much appreciated!
Josh.
-
... "http://www.scootertronics.com/gy650exhaust.html"
..there's one...
.. "http://www.scootertronics.com/hipeexgy650.html"
..and another...
.."http://www.scootertronics.com/gy6exhaust1.html"
..aannd another...
peace
-
The v8 exhaust is for 2 strokes and I dont think it is much good. I am using one and I think it is not flowing as well as it should.
-
..drilled holes in my stock, and i liked it!.....
..the taste of her cherry chapstick...
..ummm...sorry...there was this song playin' and it kinda fit....
:D
-
... "http://www.scootertronics.com/gy650exhaust.html"
..there's one...
.. "http://www.scootertronics.com/hipeexgy650.html"
..and another...
.."http://www.scootertronics.com/gy6exhaust1.html"
..aannd another...
peace
Thanks for the ideas wordslinger! These are still a bit too showy...... CarbonFibre, Chrome etc.
Ideally, something like these would be great....
http://cgi.ebay.com/ebaymotors/SYM-PERFORMANCE-EXHAUST-PIPE-50CC-SYM-EURO-JET-SCOOTER-/270555608943?cmd=ViewItem&pt=Race_Car_Parts&hash=item3efe5ef76f (http://cgi.ebay.com/ebaymotors/SYM-PERFORMANCE-EXHAUST-PIPE-50CC-SYM-EURO-JET-SCOOTER-/270555608943?cmd=ViewItem&pt=Race_Car_Parts&hash=item3efe5ef76f)
http://cgi.ebay.com/ebaymotors/YMS-PERFORMANCE-EXHAUST-PIPE-ELITE-DIO-SA50-SR50-SK50-/270522336958?cmd=ViewItem&pt=Motorcycles_Parts_Accessories&hash=item3efc6346be (http://cgi.ebay.com/ebaymotors/YMS-PERFORMANCE-EXHAUST-PIPE-ELITE-DIO-SA50-SR50-SK50-/270522336958?cmd=ViewItem&pt=Motorcycles_Parts_Accessories&hash=item3efc6346be)
http://cgi.ebay.com/ebaymotors/PERFORMANCE-EXHAUST-YAMAHA-RAZZ-SH50-EZ-BOLT-ON-POWER-/270596954586?cmd=ViewItem&pt=Motorcycles_Parts_Accessories&hash=item3f00d5d9da (http://cgi.ebay.com/ebaymotors/PERFORMANCE-EXHAUST-YAMAHA-RAZZ-SH50-EZ-BOLT-ON-POWER-/270596954586?cmd=ViewItem&pt=Motorcycles_Parts_Accessories&hash=item3f00d5d9da)
Josh
-
The v8 exhaust is for 2 strokes and I dont think it is much good. I am using one and I think it is not flowing as well as it should.
Thanks for the heads-up Sid, might steer clear of that one then!
Josh
-
Yeah, I have had to pull the jug a few times and the heat marks each time were pretty bad.
-
Feel free to call me an idiot, but by "jug" you mean Carb, Yes?
-
He's refering to the cylinder.The thingy that houses the piston, There are no stupid questions. ;D
-
Ohhhh... the cylinder, the thing that houses the piston....
How Boreing... get it BORE-ing.... ha ha ha ha get it? Bore... as in bore and stroke of the piston/cylinder...... er...... Bore....
Just HAD to do that ;D
Josh
-
;D ;D ;D
-
...dang...
...calm down jb...you're going to hyper-ventilate!!!
:o
-
Ha ha he he.... BORE! ;D ;D ;D ;D