KymcoForum.com
General => General Discussion => Topic started by: PaulF on December 20, 2017, 10:28:14 PM
-
With my new 200i there is a bit of a rough feeling when easing off the throttle or when feathering the throttle up and down slightly whilst riding. It feels like a slight vibration or roughness and I did not get this on my old 125 LIKE. Any ideas on what may be doing this and which component may be the cause of it? I have just received my Dr Pulley sliders but don't know if they would help if it is something else that may need looking at.
-
Hey Paul,
I remember posting a complaint early days about the throttle being more of an "on - off" switch than a smooth applicant of light throttle power. Herky-jerky at the lightest throttle speeds.
Learned to deal with it over the years - but a LIKE200I is not my fav vehicle in crowded, light throttling city traffic stop and goes 15 feet at a time.
Do not recall any other kinds of roughness.
On a motorcycle I could work the clutch and gas for smooth low speed riding ....but a scooter's centrifical clutch has a mind of its own. It catches, then throttle off, it doesn't.
One can ride the brake I guess to work against things...but I don't.
If this isn't your issue - keep describing so we can throw ideas at it. Like pasta...one of 'em might stick on the wall.
Imho...don't think Dr P's are the fix...but I'm certainly no expert.
Stig
-
Best way to describe it Stig is that say when coming to a corner or a set of traffic lights and you ease of the throttle there is a vibration that is felt when the power drops. If you ride along at say 40kms or so and back off or give it a bit more throttle it is felt again. Feels like it is coming from the transmission.