KymcoForum.com
Scooters - 125 to 300 => People GT 300i => Topic started by: Sqooter on November 08, 2017, 02:24:17 PM
-
Hi Scooter Friends,
This part recently broke off our People scooter.We noticed it when we unloaded it off a ramp carrier. I have looked through exploded parts diagrams and cannot find it. It is very cleanly broken off on one end. The other end appears to be a plastic bracket to hold a hose. Any help will be greatly appreciated.. I am not sure the image is showing. It is 810 kB .I choose it in the attachment box and also pressed insert image but it did not show up in the preview screen.
Thanks, Sqooter
-
I see three of part # 90651, the plastic hose clamp, on here. I'm guessing the metal part was welded to the frame. If you remove the pet carrier you should be able to tell which of those 3 clamps is missing and figure out where the bracket was welded to the frame.
http://www.kymcopartsmonster.com/p/Kymco-Parts#/Kymco_USA/BF60AF_PEOPLE_GTi300/F10_-_Fuel_Tank/05%7c%7e03%7c%7e0005/05%7c%7e03%7c%7e0037 (http://www.kymcopartsmonster.com/p/Kymco-Parts#/Kymco_USA/BF60AF_PEOPLE_GTi300/F10_-_Fuel_Tank/05%7c%7e03%7c%7e0005/05%7c%7e03%7c%7e0037)
-
Thank you so much. Will get into it in the morning!
-
We found the rest of the bracket on the engine block. My friend welded the bracket and we mounted it back on the engine. It keeps a fuel line away from the engine.Thanks for your help.
-
You are welcome, pleased that I was able to help. Wonder why it gave way in the first place. Haven't looked at mine but think after 13k miles it's still fine.