KymcoForum.com

General => Eye Candy | Videos and Pics => Topic started by: benlg81 on July 10, 2010, 04:28:25 PM

Title: hi and here is the start to my bike
Post by: benlg81 on July 10, 2010, 04:28:25 PM

hi all

bought this last week off a mate who crashed it

still looked good

(http://i66.photobucket.com/albums/h250/benlg81/morepedpics004.jpg)

but got it back to mine and spent a bit fo time today taking it to bits to give it the once over before gettin mot ect

(http://i66.photobucket.com/albums/h250/benlg81/kymcostrip.jpg)
(http://i66.photobucket.com/albums/h250/benlg81/kymcoparts.jpg)

found the front end issue

(http://i66.photobucket.com/albums/h250/benlg81/kymcofork.jpg)

so need to get a new part anyone got a spare?

also need to patch weld the exhaust or find a replacemnt as it has a hole where the pipe enteres the can

will keep you posted

Title: Re: hi and here is the start to my bike
Post by: blue on July 10, 2010, 10:24:29 PM

wow good luck with that been there done that I had a scoot that was going bad and found another just like it with less then 450 miles on it so I took the front of it and put it on the other it was a good find because I turned around and sold the old scoot for parts for more then what I payed for the used one, im sure everything well work out for ya good luck.

Title: Re: hi and here is the start to my bike
Post by: benlg81 on July 25, 2010, 02:06:25 PM

bike back together and finally taught myself to weld using the muffler as my test piece all sorted now just got to get a mot now roll on pay day

welds not the prettiest but they do the job

(http://i66.photobucket.com/albums/h250/benlg81/DSCF1041.jpg)
(http://i66.photobucket.com/albums/h250/benlg81/DSCF1040.jpg)
(http://i66.photobucket.com/albums/h250/benlg81/DSCF1039.jpg)
(http://i66.photobucket.com/albums/h250/benlg81/DSCF1038.jpg)

Title: Re: hi and here is the start to my bike
Post by: wordslinger on July 29, 2010, 01:40:37 AM

..yeah, those pipes are a bit difficult to weld very pretty....

..but as long as it works!!!!

Title: Re: hi and here is the start to my bike
Post by: Tony M on July 29, 2010, 08:12:12 AM

I've never welded anything in my life so you did well for your 1st attempt

Title: Re: hi and here is the start to my bike
Post by: shubonker on August 01, 2010, 03:21:23 AM

Hey i've got a stock agility 50 exhaust lying around if you're interested.  It was only 2 months old before i swapped it out. 

Title: Re: hi and here is the start to my bike
Post by: wordslinger on August 01, 2010, 03:24:18 AM

...who...me??

 ;D