KymcoForum.com

General => General Discussion => Topic started by: Tim1214 on September 17, 2017, 04:02:11 PM

Title: Can anyone help me figure my carb mixture screws?
Post by: Tim1214 on September 17, 2017, 04:02:11 PM

I'm looking to know which Screw adjusts idle, and which for fuel/air, I've attached a pic of the same carb. Thanks

Title: Re: Can anyone help me figure my carb mixture screws?
Post by: ole two wheels on September 17, 2017, 05:19:48 PM

Hello Tim and welcome to the forum. The screw in the very middle is the idle adjustment. The one at the very bottom is a bowl drain and the one to the left of the idle, closest to the intake, is your air mixture . Hope this helps.

Title: Re: Can anyone help me figure my carb mixture screws?
Post by: Tim1214 on September 17, 2017, 06:55:29 PM

Thank you :)

Title: Re: Can anyone help me figure my carb mixture screws?
Post by: souzamoto on September 18, 2017, 06:07:36 PM

Quote from: ole two wheels on September 17, 2017, 05:19:48 PM

Hello Tim and welcome to the forum. The screw in the very middle is the idle adjustment. The one at the very bottom is a bowl drain and the one to the left of the idle, closest to the intake, is your air mixture . Hope this helps.

Nit Picking but....The screw you call the air mixture screw is actually called a Fuel Mixture Screw. if the screw is on the intake side of the slide it's a Fuel screw, if on the airbox side of the slide it's an Air Screw.
 

Title: Re: Can anyone help me figure my carb mixture screws?
Post by: ole two wheels on September 19, 2017, 02:05:43 AM

Okay