KymcoForum.com
General => Technical | How To => Topic started by: AylmerFreerider on September 03, 2017, 09:18:14 PM
-
Getting ready to upgrade my spring and am trying to decipher which one to go with on my 2015 Kymco Super 8 50R (4 stroke)
My set up is as follows:
Piolini High Speed Variator (6.9 gram rollers)
Technigas Silent Pro Exhaust
The Polini says to go with a 15% stiffer spring but the issue is I do not know what the OEM spring is.
I keep seeing go with the red(1500) or go with the white(1000).
Any advice would be greatly appreciated
-
Also should I be changing the little springs to as well at the same time?
-
To be honest, to buy the spring tool, and a set of springs, it's just the same price and less hassle to buy an entire clutch assembly off eBay (around $20 to $30).
-
Sorry I dont know what the OEM spring tension is. If its helpful, the part number is 23233-KEE1-C10. If you decide to replace it, here is the way that I remove the clutch nut;
https://www.youtube.com/watch?v=aEDdglsl9PM (https://www.youtube.com/watch?v=aEDdglsl9PM)