KymcoForum.com

General => Technical | How To => Topic started by: Photoj on August 15, 2017, 09:20:16 PM

Title: 2011 Maxxer 450i fuel pump
Post by: Photoj on August 15, 2017, 09:20:16 PM

Loaded up the Maxxer to head out to staging area, drove 40 kilometres on a gravel road, somewhat bumpy. Went to start quad and fuel pump didn't whirl up for usual 5 seconds. Motor still turned over but obviously no fuel. All fuses seam okay, ran some power to pump and it works. Anything else I should check before trying to chase a possible broken wire in harness?
Thanks for any suggestions

Title: Re: 2011 Maxxer 450i fuel pump
Post by: CROSSBOLT on August 17, 2017, 01:46:27 AM

Unplug fuel pump, apply 12 volt directly to pump wires and see if it runs.

Karl