KymcoForum.com

General => General Discussion => Topic started by: K7 on August 11, 2017, 03:59:15 PM

Title: Kymco Pulsar 125 workshop manual?
Post by: K7 on August 11, 2017, 03:59:15 PM

Hi there, new to this forum.

I have recently acquired an engine out of a Kymco Pulsar 125. It has a faulty 3rd gear which i am going to try and fix, however getting to 3rd gear essentially requires taking apart the engine. Is there a workshop manual or similar that gives guidance to rebuilding engines? Id prefer not to dive in and hope for the best.

Thanks.

Title: Re: Kymco Pulsar 125 workshop manual?
Post by: big blue on August 11, 2017, 04:33:49 PM

Hello and welcome. I found this item on UK E-Bay...http://www.ebay.co.uk/itm/Haynes-Manual-No-4871-Motorbike-Motorcycle-for-Kymco-Pulsar-125-99-06-/391453053205 (http://www.ebay.co.uk/itm/Haynes-Manual-No-4871-Motorbike-Motorcycle-for-Kymco-Pulsar-125-99-06-/391453053205) Also available here...http://www.themotorbookstore.com/chinese-taiwanese-korean-motorcycles.html (http://www.themotorbookstore.com/chinese-taiwanese-korean-motorcycles.html)

Title: Re: Kymco Pulsar 125 workshop manual?
Post by: K7 on August 12, 2017, 09:08:57 AM

Hi,

I have also seen these but i am not sure if a service/repair manual is going to show how one goes about taking apart the engine. Arent those workshop manuals? I have tried finding a haynes workshop manual but have had no luck :( Unless i am mistaken and the manual you have linked does show how to take apart an engine?

Thanks

Title: Re: Kymco Pulsar 125 workshop manual?
Post by: K7 on August 22, 2017, 08:20:18 PM

I eventually ended up buying the Haynes Chinese 125 manual, and goes through a complete engine rebuild, which should be of help during my rebuild.

Thought i would post this info here for when/if people in the future try and find a guide to rebuilding a Pulsar engine, as i struggled myself to find any information.

I now have an absolute c**t of a flywheel bolt to try and remove before i can make use of the manual!