KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: DBaum262 on August 09, 2017, 02:46:07 AM

Title: 2015 Agility 50 replace turn signal housing
Post by: DBaum262 on August 09, 2017, 02:46:07 AM

Hi, I need to replace my rear turn signal housing. The scooter fell on its side and now the turn signal is hanging on ever so slightly to the plastic housing. I'm assuming I need to replace the rear fender housing that would include the plastic piece that holds the turn signal bracket. Any suggestions where I start or if anyone has had to change the turn signal? I did consider some type of plastic bonding (super glue) as an option. This is my first time needing to replace parts. Appreciate any feedback! Thks.

Title: Re: 2015 Agility 50 replace turn signal housing
Post by: epmop on August 28, 2017, 12:26:34 AM

It looks like it is part #80105 and can be purchased for less than $50 here: http://www.kymcopartsmonster.com/p/Kymco-Parts#/Kymco_USA/KG10SA_AGILITY_50/F18_-_Tail_Light/04%7c%7e40%7c%7e0005/04%7c%7e40%7c%7e0055 (http://www.kymcopartsmonster.com/p/Kymco-Parts#/Kymco_USA/KG10SA_AGILITY_50/F18_-_Tail_Light/04%7c%7e40%7c%7e0005/04%7c%7e40%7c%7e0055)

Title: Re: 2015 Agility 50 replace turn signal housing
Post by: DBaum262 on August 31, 2017, 02:17:08 AM

Thanks Epmop. I appreciate the diagram. I haven't been able to find anything like that.