KymcoForum.com
Scooters - 50cc => People 50 => Topic started by: darkarchon729 on July 03, 2010, 06:42:45 PM
-
Hello, im totally new to the forum and although ive been looking around through it, cant seem to find any specific information on the cdi box, more specifically, how to remove the rev limit in it for the 2007 people. i've seen the procedure for other kymco models, but im not entirely sure its the same process. any help would be greatly appreciated and probably not just from me, theres gotta be others who are just as noob-ish on the subject... or its just me.
-
What's up darkarc, There is a green wire that has a pigtale connector. You just unplug it. TA DA!!! (It's under the cowl right on the cdi)
-
..2t or 4t?...
-
well my people is a 2t if that changes anything but is there a difference between cutting and unplugging the green wire? i cut the green wire that went into the cdi because it seemed like i wouldnt be able to unplug it unless a few other wires came with it. when i tried to start my scoot after that though it wouldnt start up, so i just put the wire back and wrapped electrical tape around it. im assuming i got the wrong green wire?
-
Your cdi should have a green wire comming out the bottem that just plugs together.I havn't seen the 2007 but the 2008 on have a different cdi they can be cut but are internal there are some links to how to do it here somwhere or you have to order the cobra cdi,there are probably others that will work,the cobra is a bit pricey.
-
..my 2001's cdi has no wire, green or otherwise on th bottom of th unit...
..it's also brown, in it's coloration...
..i think it looks oem, but i'm not sure...
..anybody know?
???
-
Don't know if the brown is stock or not think my zx super was brown,havent seen anything older than the 2002 up close myself
-
yeah there isn't any wire coming from the bottom of my cdi. there is a green wire along with other wires coming from the top but i ruled that one out because i cut it and i had to tape it back up when it didn't start.
-
you have to cut through the bottem plastic to derestrict or get the cobra cdi ,didn't think they started that till 2008 there is a link on the forum somwhere,here it is http://kymcoforum.com/index.php?topic=2133.msg15955#msg15955 (http://kymcoforum.com/index.php?topic=2133.msg15955#msg15955)
-
...so, art, is that the same cdi as some ppls??
..that cdi mod was from my agility 50 4t....
..can it be true??
-
came from zombie looks just like mine I got one here never got around to cutting,I'll make sure to try soon allready had the cobra ::)
-
"http://kymcoforum.com/index.php?topic=2133.msg15955#msg15955"
..that's an a50 link...of mine....
-
It's making the rounds zom gave to me,read on some other forum that it's sopossed to work.throw your a50 in the people Ha!
-
well my people is a 2t if that changes anything but is there a difference between cutting and unplugging the green wire? i cut the green wire that went into the cdi because it seemed like i wouldnt be able to unplug it unless a few other wires came with it. when i tried to start my scoot after that though it wouldnt start up, so i just put the wire back and wrapped electrical tape around it. im assuming i got the wrong green wire?
I have a 4t but my green wire that just un plugs is not conected to the cdi it has other wires conected to it. HELP PLEASE
-
http://kymcoforum.com/index.php?topic=2133.msg15955#msg15955 (http://kymcoforum.com/index.php?topic=2133.msg15955#msg15955)
Just follow the instructions there.
-
What year is it?
May not have a rev limiter at all. My 2010 ppl 2t doesn't. Of course that's apples and oranges.