KymcoForum.com
Scooters - 125 to 300 => Downtown 300 => Topic started by: Nireen on May 11, 2017, 07:50:07 AM
-
Hey :) I am going to be packed down fairly good soon for a trip and I wonder about resetting the shocks. Do I need to do this and how? I am going to have a couple of bags on the back see along with my top case. I decided I did not like the saddle bags for several reasons and sold them :( to bad I did like the hi-vis!
-
Good morning,
Your scooter probably came with the shocks set at the middle setting.
Unless you are adding a lot of weight to the top case (not recommended by Kymco) you might not need to adjust the shock pre-load more than one notch....or maybe no need to adjust since you are not a heavy rider to begin with.
Adjustment should be shown in your owner's manual....and perhaps the hooking/turning tool came in your tool bag?
Probably a youtube of setting shock pre-loads on motorcycles or scooters.
Stig
-
Thank you :) well I am going to have a fair bit of weight maybe 60 pounds on the seat with me. The top box won't be having heavy stuff for sure.
Good morning,
Your scooter probably came with the shocks set at the middle setting.
Unless you are adding a lot of weight to the top case (not recommended by Kymco) you might not need to adjust the shock pre-load more than one notch....or maybe no need to adjust since you are not a heavy rider to begin with.
Adjustment should be shown in your owner's manual....and perhaps the hooking/turning tool came in your tool bag?
Probably a youtube of setting shock pre-loads on motorcycles or scooters.
Stig
-
I got one of these off Ebay:
http://www.ebay.co.uk/itm/Motorcycle-Steering-Suspension-Double-Sided-C-Spanner-38-45-45-52mm-/142333213468?hash=item2123b87b1c:g:YY0AAOSwdGFY38ND (http://www.ebay.co.uk/itm/Motorcycle-Steering-Suspension-Double-Sided-C-Spanner-38-45-45-52mm-/142333213468?hash=item2123b87b1c:g:YY0AAOSwdGFY38ND)
...and it did the job perfectly, other than being a bit awkward on the exhaust side shock.
-
The tool kit that should have come with your scooter should have a shock adjustment tool. (spanner).But on used scoots, some times they are missing. As stated before you probably won't need an adjustment and the extra weight should make it ride even better, b u t, knowing how you love to tinker, you will probably move it around a bit. No harm. Some times it's fun to experiment.
Mac
-
The DT's shocks are only preload adjustable.
There are 5 settings, 1-5, 1 being the 'softest' & 5 being the 'hardest'.
To adjust it, you need to take the weight off the shocks by placing the scooter on the center stand.
Then with your hand grab the lower part of the shock and turn to the desired setting. It is stepped so you'll get the right number each time. The numbers are stamped on the shock with the arrow to indicate the setting.
Hey :) I am going to be packed down fairly good soon for a trip and I wonder about resetting the shocks. Do I need to do this and how? I am going to have a couple of bags on the back see along with my top case. I decided I did not like the saddle bags for several reasons and sold them :( to bad I did like the hi-vis!
-
:D Ah you get me. I have to see how it works!! I do have a tool. I bought my bike new. I must find it now.
The tool kit that should have come with your scooter should have a shock adjustment tool. (spanner).But on used scoots, some times they are missing. As stated before you probably won't need an adjustment and the extra weight should make it ride even better, b u t, knowing how you love to tinker, you will probably move it around a bit. No harm. Some times it's fun to experiment.
Mac
-
Awesome thanks! :)
The DT's shocks are only preload adjustable.
There are 5 settings, 1-5, 1 being the 'softest' & 5 being the 'hardest'.
To adjust it, you need to take the weight off the shocks by placing the scooter on the center stand.
Then with your hand grab the lower part of the shock and turn to the desired setting. It is stepped so you'll get the right number each time. The numbers are stamped on the shock with the arrow to indicate the setting.
-
Will there be a new, fun adventure video ??
Look forward to watching it !
redk
-
Oh yes Red on many levels and one of them will be this! https://www.google.ca/search?q=Cabot+Trail+pictures&oq=Cabot+Trail+pictures&aqs=chrome..69i57.4218j0j8&sourceid=chrome&ie=UTF-8 (https://www.google.ca/search?q=Cabot+Trail+pictures&oq=Cabot+Trail+pictures&aqs=chrome..69i57.4218j0j8&sourceid=chrome&ie=UTF-8) I can hardly wait to do this little trip. ;D
Will there be a new, fun adventure video ??
Look forward to watching it !
redk
-
WoW !
What fun !
That looks Magnificent !!!
I shall look forward to viewing your video !
Will you be able to purchase additional digital storage for the camera before your trip ?
(One of these days I shall try to get my video components in some sort of effective condition ! :-0 )
redk
-
Amazing isn't it. It is only about 3 hours from me now. I have everything worked out for where my camera's will be along with my small laptop and chargers etc. :)
WoW !
What fun !
That looks Magnificent !!!
I shall look forward to viewing your video !
Will you be able to purchase additional digital storage for the camera before your trip ?
(One of these days I shall try to get my video components in some sort of effective condition ! :-0 )
redk
-
Three hours distant...
I'm thinking two nights camping in a small tent ??
...never been one for those IronButt hi-speed cross country runs...
Or trains.
"Stop this thing! I wanna spend some time here and look at all this cool stuff !" lol
A leisurely pace, enjoying new scenery is my preference.
And there's always some really cool spot where you might want to set up a tripod and film yourself against a panoramic background.
Too bad those SoloCam video trackers are so pricey !
redk
-
:) I shall be camping out yes. I have helmet cams.
Three hours distant...
I'm thinking two nights camping in a small tent ??
...never been one for those IronButt hi-speed cross country runs...
Or trains.
"Stop this thing! I wanna spend some time here and look at all this cool stuff !" lol
A leisurely pace, enjoying new scenery is my preference.
And there's always some really cool spot where you might want to set up a tripod and film yourself against a panoramic background.
Too bad those SoloCam video trackers are so pricey !
redk
-
Hey :) I am going to be packed down fairly good soon for a trip and I wonder about resetting the shocks. Do I need to do this and how? I am going to have a couple of bags on the back see along with my top case. I decided I did not like the saddle bags for several reasons and sold them :( to bad I did like the hi-vis!
I Wt. 220 lb. with 30 lb. of tools under the seat , my setting is # 3 so you are good to go below # 3 unless you like to race and do the curves at speed, 2011 downtown 85,000 Km
-
Bearz! Watch out for the bearz!
-
LOL YUP!!! I almost run into a deer last summer. Got that on video actually. I should upload it.
Bearz! Watch out for the bearz!
-
Refer to the attachment.
BLUE is the market to show which setting you're on.
ORANGE is the area where you will notice the 1-5 levels of setting. I have mine on '5'.
-
Awesome! Now where does that tool hook on to to change settings?
Refer to the attachment.
BLUE is the market to show which setting you're on.
ORANGE is the area where you will notice the 1-5 levels of setting. I have mine on '5'.
-
The tip of the tool hooks into the holes. Simply turn the tool while the scooter is on the centrestand. Makes sure the numbers are identical on both left and right sides.
-
Now I can't find my tool! Not like me to lose things either!
The tip of the tool hooks into the holes. Simply turn the tool while the scooter is on the centrestand. Makes sure the numbers are identical on both left and right sides.
-
You don't need the C-spanner. Just get a good grip on it and twist.
-
Oh great!
You don't need the C-spanner. Just get a good grip on it and twist.
-
Well that was easy!! Mine were already set on number 3.
You don't need the C-spanner. Just get a good grip on it and twist.
-
You don't need the C-spanner. Just get a good grip on it and twist.
Jeezus, who are you?
Popeye?
-
Seriously. That's how I do it.
Lifting it up abit to get the notches to turn thru will make it easier.
Jeezus, who are you?
Popeye?
-
Seriously. That's how I do it.
Lifting it up abit to get the notches to turn thru will make it easier.
True that 😁
Just make sure its fairly clean and no stones in there before tvisting/turning
-
GOOD POINT :D
True that 😁
Just make sure its fairly clean and no stones in there before tvisting/turning
-
Loads of stones get logged between the inner and outer tubes.
Nothing much one can do to get them all out.
-
You don't need the C-spanner. Just get a good grip on it and twist.
I used some heavy gloves when scoot was new. Later added a little lube spray.....but haven't messed with them in a long time.
Quoting Vivo, "With the earth spinning so fast - must be careful not to set them too light!"
Good point.
Stig
Stig