KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: rolos on September 22, 2016, 07:14:49 PM

Title: Agility City 50 CDI check
Post by: rolos on September 22, 2016, 07:14:49 PM

Hi! Please help me! I have an Agility City 50 4t (2009). The scooter does not have spark. Sparkplug and ignition coil is ok. How can I check the CDI and the voltage regulator with a multimeter? Does anyone have a diagram?
Thanks in advance!

Title: Re: Agility City 50 CDI check
Post by: JayAre on September 22, 2016, 09:32:40 PM

Do a search on using this forums search engine for a manual download. I was able to get one in PDF format for my wife's 2013. It's invaluable to have!!!

Title: Re: Agility City 50 CDI check
Post by: blue on September 25, 2016, 01:49:41 AM

If scoots turns over its not the cdi.spark might be just weak and not strong enough to start.

Title: Re: Agility City 50 CDI check
Post by: rolos on October 01, 2016, 04:04:26 AM

The CDI was bad. With a new one is running. :)

Title: Re: Agility City 50 CDI check
Post by: JJJoseph on November 27, 2016, 07:13:41 AM

Correct.  If no spark, swap over the CDI.  No point fiddling with any analytics or diagnostics.  A spare CDI is cheap and can be swapped in less than a minute.  Then you'll know what the problem is.