KymcoForum.com

Scooters - 125 to 300 => Super 8 150 => Topic started by: Amaro321 on August 21, 2016, 10:49:29 AM

Title: Broken CVT casing?...
Post by: Amaro321 on August 21, 2016, 10:49:29 AM

So my kick starter stopped working, leaving me to carry around a portable jumper box to start my bike. Any ideas on what I can do here?
I opened up my cvt case and found this under the starter gear thing (photo below)
(http://uploads.tapatalk-cdn.com/20160821/9b7e4dbe86bc2f67c533c998739bb623.jpg)
(http://uploads.tapatalk-cdn.com/20160821/d9dacbf692bab8abf3cc44e3333841a1.jpg)(http://uploads.tapatalk-cdn.com/20160821/3a88a1d6f8d90e87120bc7ce25234f47.jpg)
(http://uploads.tapatalk-cdn.com/20160821/581e110609c433e63cc310dcdb6a9d1d.jpg)


Sent from my iPhone using Tapatalk

Title: Re: Broken CVT casing?...
Post by: Stig / Major Tom on August 24, 2016, 10:28:03 AM

Sorry for your luck here.
Buy new or used part. ...replace .battery or whatever is preventing an electric start.
Doubt this broken part can be repaired.
Search scooter salvage yards?
Good luck.....please tell us how you fixed this.
Stig

Title: Re: Broken CVT casing?...
Post by: Amaro321 on August 28, 2016, 12:06:07 PM

Will do. So far nothing on the kick start and walmart doesnt seem to specify which battery they sell (everstart) will fit the Super 8 150


Sent from my iPhone using Tapatalk

Title: Re: Broken CVT casing?...
Post by: Stig / Major Tom on August 28, 2016, 05:10:36 PM

Quote from: Amaro321 on August 28, 2016, 12:06:07 PM

Will do. So far nothing on the kick start and walmart doesnt seem to specify which battery they sell (everstart) will fit the Super 8 150


Sent from my iPhone using Tapatalk

Battery specs for Super 8 150 from www.YUASAbatteries.com (http://www.YUASAbatteries.com)
(http://i68.tinypic.com/2cqmwir.jpg)
Stig

Title: Re: Broken CVT casing?...
Post by: CROSSBOLT on August 28, 2016, 09:37:36 PM

Some welder that has TIG skills should be able to weld that piece back and the hole reamed out. Ask De dee what he thinks about that.

Karl

Title: Re: Broken CVT casing?...
Post by: Amaro321 on August 28, 2016, 11:52:34 PM

Quote from: CROSSBOLT on August 28, 2016, 09:37:36 PM

Some welder that has TIG skills should be able to weld that piece back and the hole reamed out. Ask De dee what he thinks about that.

Karl

Hmmmmm I didn't really consider a weld (I figured I'd have to replace it) I'll ask around since a couple of the Amish around here have welding specialty  shops


Sent from my iPhone using Tapatalk

Title: Re: Broken CVT casing?...
Post by: Amaro321 on October 22, 2016, 08:44:04 AM

Anyone know what the dimensions on our cvt cases are?  I was looking at these
http://www.partsforscooters.com/169-41?sc=38&category=138721


Sent from my iPhone using Tapatalk