KymcoForum.com
Scooters - 125 to 300 => Super 8 150 => Topic started by: mattler on July 30, 2016, 10:30:45 AM
-
Just thought I`d say hi and introduce myself.
I work in UK but live in PH and just got myself a super 8 150cc
Although my other bike is a 2015 Z1000 I`m over the moon with the Kymco
I`m just breaking in the engine right now and using variable revs all the time and changed first oil at 100km.
I will do another at 500km then 1000km before I start to push it a little.
I`m planning on squeezing a bit more power out of it as it struggles uphill when I have a back ride with me.
Ane thing I have noticed though is the my wife`s Yamaha Mio 115 is a LOT smoother and better response when pulling way...If anyone has any ideas on how to make it a bit more responsive then please let me know :)
Many thanks
Matty
-
Hi Matty, welcome to the forum. I am a pretty new member myself and have found this to be a very friendly place. Hopefully someone will have an answer for you.
Paul
-
Hello Mattler and welcome to the Forum! I would wait until the Super is completely broken in before I would evaluate its performance. After that, you may want to look in to replacing the stock rollers with Dr. Pulley sliders. They generally give a more linear, smoother, take-off. Best of luck and be careful. ;)
-
variable revs is the way to go. but you should push it... your only worry is having the brakes broken in. i never sustain a constant speed but wot should be the limit.
if then you feel u need some extra accel.. go with sliders. downsize 1 gram and ull see
Enviado desde mi SM-G920I mediante Tapatalk
-
Hi, Matty! Welcome! Sounds like you are having fun on the scoot as you should. We used to have a guy on here call sign Vivo. He had a tour service/taxi/rental car service somewhere near Manila, I think, and he sent some GREAT pictures of the road to Baguio. He dropped off a coulpa years ago but I think his business just got real busy. Let us know what's happening in the PI and your progress with the scoot!
Karl
-
I replaced my rollers with Dr Pulley Sliders (13gram) and got very close to original performance only the RPM's lowered slightly. So you'll want to go lighter than 13 gram.
-
Thanks for the warm welcome and all the replies guys. I`ve been offline due to having to haul ass back to the UK for a 1 day training course so literally just got back.
As for break in I am following the "vary revs" rule and will use low quality oil until I feel it is broken in then put the good stuff in it.
I also just bought my wife a yamaha mio so that we can both enjoy the world of scootering.