KymcoForum.com
General => General Discussion => Topic started by: Stig / Major Tom on May 28, 2016, 12:43:52 AM
-
When climbing back on my LIKE200i while out riding last week I stepped on my keys . Fortunately I only broke the key away from the key ring - and did not bend or break the key.
I purchased a 3rd key last week and will get it cut & carry this spare with me in my top pocket of my armored jacket. I already do this with the Burgman.
eBay item number:
280902945456
$12 - make certain you stipulate left or right slotted key.
There are cheaper blanks, but I wanted the modest safety of the plastic covered end on the portion that your knee will find in an 'off'.
Stig
(http://i63.tinypic.com/1234a4h.jpg)
-
My dealer gives away free blank keys .If needed .just have to go get it cut...........
-
I always get a third key for all of my bikes.
-
Not a bad idea, guys! We all gotta get to know your dealer, Blue!
Hey, Klav! We'll be passing your area this coming Tuesday on our way to Maggie Valley, NC on US 72! I'll be on a white DT300i and she'll be on her all black GTi300 with the extra whells pullin' a trailer. If it ain't rainin' real bad......
Karl
PS: NOPE, we won't. We'll be further south on 278 so disregard.
-
Funny you should mention this. Yesterday afternoon I locked my keys up in under seat storage compartment. Thankfully, I had my Phillips screwdriver in the top case which was unlocked. So I had the pleasure of removing the front off of my Xciting in the Pilot parking lot in order to access the release cables for the seat. Put a damper on my first ride since replacing my Stator . I always feared doing that. Well, now I know that the extra key does no good when it's 25 miles away.
Sent from my iPad using Tapatalk
-
Smart folks don't break their keys, hence no need for a 3rd, 4th or 5th key. Capiche paisano?.................better go make sure my spare is where I think it is.
-
Funny you should mention this. Yesterday afternoon I locked my keys up in under seat storage compartment. Thankfully, I had my Phillips screwdriver in the top case which was unlocked. So I had the pleasure of removing the front off of my Xciting in the Pilot parking lot in order to access the release cables for the seat. Put a damper on my first ride since replacing my Stator . I always feared doing that. Well, now I know that the extra key does no good when it's 25 miles away.
Sent from my iPad using Tapatalk
Yep.....35 miles away is no help....and embarrassing when they're watching from the coffee shop.
Last winter I lost my Burgman keys at my coffee village when getting ready to leave.
Not in the pocket of my Slider jeans.....then I thought .....reached down and unzipped the bottom of my wind-proof over-pants (34 degree Fahrenheit day) and keys dropped out! I'd missed the jeans pocket when I let go of them.
As I climbed on the scoot I told myself to get a 3rd key ....and carry it in the ICON jacket top pocket with the spare ear plugs.. Have spares with the magnets set to open the magnetic key cover.
Years ago I tried to ford a river in Dayton after locking my keys in my Subaru.....only 2 miles as the crow flies from home - but river in the way. Problem being, this requires fording the river twice and driving home naked or in soaked clothes.
I called a cab.
Stig
-
Plenty of places to duct tape a spare key on a scoot or m/c. Frame, under plastics etc.........
-
I have spare keys to everything I own......sheeeeeee Don't tell the wife I have spare s to everything she owns too.......
-
I just picked up a 2012 People GTi300 and it only came with one key. I called to order a key blank...total price with shipping: 75 bucks. Wasn't happy about it, but didn't have a choice. I have no idea how you would open that security shutter without the proper key.
Also, new member, first post, first Kymco. I will post a proper intro and first impressions in the People forum soon!
Sent from my Nexus 5X using Tapatalk
-
I just picked up a 2012 People GTi300 and it only came with one key. I called to order a key blank...total price with shipping: 75 bucks. Wasn't happy about it, but didn't have a choice. I have no idea how you would open that security shutter without the proper key.
Also, new member, first post, first Kymco. I will post a proper intro and first impressions in the People forum soon!
Sent from my Nexus 5X using Tapatalk
The Suzuki Burgman 400 requires the very special key with magnets in coded area to open the key shutter - but these keys can be found from HongKong for just a couple of $. They come with the magnets to be installed matching your key....easily done by owner ...then key is cut by a good locksmith. I made 4 of them!
Perhaps your scooter has these available as well, apart from OEM parts houses?
Suzuki parts people get really weird about these replacement keys - but HongKong comes to the rescue of owners.
$75 key is crazy.
Stig
-
I'm usually pretty good at searching out a deal, but I came up blank. It took quite a bit of time just to figure out which key my People took. There is right and left cut, plus 2 different magnet heads. In any case, the 75 bucks is still cheaper than calling the locksmith and still having to purchase a new key after he does his work.
Sent from my Nexus 5X using Tapatalk
-
Just go to your local locksmith - with the scooter - and have them find a blank for it. Most scooters use the same blanks as some of the standard Honda, Yamaha, or Kawasaki motorcycles. It will only take about 10 minutes at most to find the right blank, and when cut, will run you between $3 - $5 each. I have worked part time with a lock shop here in town, and all the Kymco, Buddy and SYM scooter blanks were pretty easy to chase down. Now those fancy Burgman keys, well, you gotta go to the dealer and let them fleece you.
-
Smart folks don't break their keys, hence no need for a 3rd, 4th or 5th key. Capiche paisano?.................better go make sure my spare is where I think it is.
Ahh, leave the key in the side of the Super 8 and brush against it with your leg while putting it up on the stand. Thats how my key broke.
-
I'm usually pretty good at searching out a deal, but I came up blank. It took quite a bit of time just to figure out which key my People took. There is right and left cut, plus 2 different magnet heads. In any case, the 75 bucks is still cheaper than calling the locksmith and still having to purchase a new key after he does his work.
Sent from my Nexus 5X using Tapatalk
Yes well if magnet head is not in the aftermarket for your scooter. .....and I could understand that it might not be.....then you're truly stuck with a $75 key.
Burgman owners say a locksmith can squat next to scooter and make a key in short order....BUT key will not have magnet head....so if that shutter ever gets closed you're truly sunk.
Better to get correct key!
Stig
-
Hey, Klav! We'll be passing your area this coming Tuesday on our way to Maggie Valley, NC on US 72! I'll be on a white DT300i and she'll be on her all black GTi300 with the extra whells pullin' a trailer. If it ain't rainin' real bad......
Karl
PS: NOPE, we won't. We'll be further south on 278 so disregard.
Have fun. I love Maggie Valley and the roads around it. I was in that area this weekend. I did a ride report here: http://bamarides.com/ride/index.php?topic=1071.0 (http://bamarides.com/ride/index.php?topic=1071.0)
-
Update on my LIKE200I spare key.
Took the key and blank to my grumpy locksmith who charges $4....same guy who fussed when cutting spare keys for my Burgman.
He refused to cut it.....this isn't brass . .can't cut it. Actually laughed at me for trying to ruin his cutter.
Took it to hardware store...they cut perfect key for $1.60.
Humph...??
Stig
-
Update on the spare key for my People GTi300.
Ordered it 3rd week of May. You need 2 pieces: the plastic keyhead with magnet that unlocks the shutter AND a key blank. After almost two months wait time I called to see where my key "combo" was. Gentleman at Kymco Parts Monster had to call Kymco and found out that the part number for the plastic key head was no longer any good. So they ordered a different part number and it showed up in my mailbox last Saturday. I open it and find a bag with 2 plastic keyheads (correct keyheads, thankfully) and the entire magnetic shutter that mounts on top of the ignition lock cylinder :o . So now I have 2 keyheads, a shutter I don't need, and no key blank to stick in the keyhead >:( . Looks like I have to put in another order for 15 bucks plus shipping to get a key blank. This will definitely end up costing over $100 just for a spare key! My advice to anyone planning to buy a Kymco with a security shutter: be absolutely sure that it comes with 2 keys, or that the price of a second key is negotiated into the purchase price. If you currently own a Kymco with a security shutter, treat those keys as if they are made of gold!!!
And don't take this post wrong, I am totally head-over-heels in love with the People. Just wish the keys were cheaper and easier to get!
-
Update on the spare key for my People GTi300.
Ordered it 3rd week of May. You need 2 pieces: the plastic keyhead with magnet that unlocks the shutter AND a key blank. After almost two months wait time I called to see where my key "combo" was. Gentleman at Kymco Parts Monster had to call Kymco and found out that the part number for the plastic key head was no longer any good. So they ordered a different part number and it showed up in my mailbox last Saturday. I open it and find a bag with 2 plastic keyheads (correct keyheads, thankfully) and the entire magnetic shutter that mounts on top of the ignition lock cylinder :o . So now I have 2 keyheads, a shutter I don't need, and no key blank to stick in the keyhead >:( . Looks like I have to put in another order for 15 bucks plus shipping to get a key blank. This will definitely end up costing over $100 just for a spare key! My advice to anyone planning to buy a Kymco with a security shutter: be absolutely sure that it comes with 2 keys, or that the price of a second key is negotiated into the purchase price. If you currently own a Kymco with a security shutter, treat those keys as if they are made of gold!!!
And don't take this post wrong, I am totally head-over-heels in love with the People. Just wish the keys were cheaper and easier to get!
Chinese replacement not available ...from Alibababababa? etc.
Bought 4 of these magnetic shutter keys for my new Burgman for less than $20....came from Hong Kong in less than two weeks.
They work fine after installing magnets properly.
Stig
-
According to Kymcos part finder thing on heir website, there are 2 different style key possibilities, a right cut or a left cut plus the shutter fob
Part numbers are
35111-LDC1-305-M1 for the right cut key blank $16.00
35111-LDC1-306-M1 for the left cut key blank $16.00
and
35111-LDC1-307-M1 for the shutter fob. $41.00
I would just call a dealer, have then check with kymco and order the correct parts
cjs