KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: premnas on June 02, 2010, 07:00:14 PM

Title: Need help with part identification
Post by: premnas on June 02, 2010, 07:00:14 PM

Being a newbie when it comes to scooter modification, I was hoping some of you with experience could help make sure I'm ordering the right part for my Agility 50.

I want to replace the stock, restricted variator bushing.

This is the part I think I need:
http://www.partsforscooters.com/Drive_face_spacer_qmb139?sc=9&category=469 (http://www.partsforscooters.com/Drive_face_spacer_qmb139?sc=9&category=469)
Its dimensions are 38mm x 20mm.
The reason I'm confused is that it's listed as a "Drive Face Spacer".

They list another part as the "variator bushing":
http://www.partsforscooters.com/151-140-Bushing;jsessionid=0a0110501f432107485e0b64493e891dc77b54e8264a.e3eSc3aPaxmLe34Pa38Ta38Nbxf0?sc=9&category=469 (http://www.partsforscooters.com/151-140-Bushing;jsessionid=0a0110501f432107485e0b64493e891dc77b54e8264a.e3eSc3aPaxmLe34Pa38Ta38Nbxf0?sc=9&category=469)
Its dimensions are 20mm x 24mm

Can someone confirm that the dimensions of the bushing I need are 38mm x 20mm?  Thanks!

Title: Re: Need help with part identification
Post by: shubonker on June 02, 2010, 07:41:14 PM

It's the "Drive Face Spacer", the first link.  That's the one i ordered.  The second one is too short. 

Title: Re: Need help with part identification
Post by: wordslinger on June 02, 2010, 09:14:35 PM

...absowootwy...shubo is right on th' money!!

Title: Re: Need help with part identification
Post by: premnas on June 02, 2010, 10:01:35 PM

Wow, thanks for the quick replies!  I thought I'd found the right bushing, but wanted to make sure before I ordered.