KymcoForum.com

Offroad => MXU => Topic started by: 86trizinger on June 01, 2010, 09:38:23 PM

Title: Need wiring diagram for MXU 150
Post by: 86trizinger on June 01, 2010, 09:38:23 PM

I need a wiring diagram for a MXu 150. I got a new GY6 engine but the stator harness is different. I don't have the original engine to swap parts on. Any help would be great.

Title: Re: Need wiring diagram for MXU 150
Post by: zombie on June 02, 2010, 04:07:22 AM

Have you checked the general section under service manuals? All I have seen has it. If you need more help I will try to look a little deeper for you. It doesn't come up w/ a quick google.

Title: Re: Need wiring diagram for MXU 150
Post by: wordslinger on June 02, 2010, 09:33:09 PM

..i searched for an hour for a service manual for the 150...

..found several for other cc, but not a 150....

Title: Re: Need wiring diagram for MXU 150
Post by: sidthesloth on June 03, 2010, 06:13:32 AM

Maybe covered by one of the others?

Title: Re: Need wiring diagram for MXU 150
Post by: zombie on June 03, 2010, 06:39:45 AM

Here's the 250cc.  http://pdftown.com/search/node/mxu+150 (http://pdftown.com/search/node/mxu+150)   Perhaps you dan get what you need from there

Title: Re: Need wiring diagram for MXU 150
Post by: 86trizinger on June 10, 2010, 03:17:27 PM

Here is my problem.. I got a new engine but the stator wires don't match colors or connectors.

I need the stator wiring diagrams for the colors of the wires.
To be more specific. I have the pulser wiring figured out. On the stator side there is 3 wires of different colors then what I have. Every diagram I look at shows all yellow.

The new engine has these colors on the Harness:
white/red
White
Black

The harness has these colors:
Black/red
pink
yellow

Any help would be great.

Title: Re: Need wiring diagram for MXU 150
Post by: zombie on June 11, 2010, 08:05:27 PM

The easiest way would be to do a resistance test on both stators. That will match up the outputs for you.

Title: Re: Need wiring diagram for MXU 150
Post by: 86trizinger on June 16, 2010, 02:34:56 AM

I don't have the original stator or I would just switch it over to the new engine

Title: Re: Need wiring diagram for MXU 150
Post by: zombie on June 16, 2010, 12:30:05 PM

If it helps on the majorty of Kymco models, the white wire is the AC out to the regulator, the yellow is the lighting wire, and the black /red goes to the cdi. So the pink on your harness I assume replaces the white.