KymcoForum.com
General => General Discussion => Topic started by: Forbes1964 on April 04, 2016, 09:06:18 PM
-
Well,My belt shredded. I'm between a Mitsubashi ( theY make the OE belt. That's what was on it) and the BANDO. I can get the Bando a little more quickly. But I'm not certain of the quality. I ride HARD about 50 miles each way, 3 or 4 days a week. My Original belt lasted for nearly 8000 miles. Anyone familiar with Bando belts? I can get a Gates or Dayco for less and more quicky, But I've seen too many complaints about them on the Xciting 250.r.
It looked good 2000 miles ago. But it shredded WITHOUT WARNING. Well,last night. I did notice that my top speed was about 4mph lower than it was 2000 miles ago. I did NOT follow my instincts a couple of weeks ago. I ALMOST ordered a drive belt for my xciting 250. But I procrastinated. As a result, it SHREDDED on my way to work this morning. Thankfully I was only 3 miles from home instead of that 20-miles from home between nowhere and nowhere else.
-
Bando belts stretch befor they will wear out.and gats will start wearing out by the speed of the scoot.if you are awear of it you can change it befor it gets to bad.
-
Mitsuboshi belts will out last all other belts , I put 20,000 miles on one belt , and it still looks good , 2,011 downtown, on my van I put 200,000 Kl. on a mitsuboshi timing belt, so I like them,.
-
From all respones on this forum....I purchased Kymco belts from Kymco parts houses which come sealed in a Kymco bag. Period. Too important a part to mess about with.
Top quality parts.
Stig
-
I second what Stig said! Kymco parts all the way. You cant go wrong with the original Kymco Parts. I learned the hard way.
-
I just wish there was a way to get one in less than a week. Seems like all the KYMCO belts from reliable sources have a week or more shipping time.
Sent from my iPad using Tapatalk
-
Buy a spare for situations like the one you are in right now.
Stig
-
Buy a spare for situations like the one you sare in right now.
Stig
So
I actually was planning on buying a belt soon. But a few other things came up. So I put it off until next month. HA! Well , the scooter said otherwise
-
What Stig said about Kymco belts......
Karl
-
Well, this is the plan. I'm buying the Bando belt because I can get it by Friday. I'll install it and be able to ride THIS weekend and until the "real" belt arrives. The REAL Kymco belt from my dealer will take approximately 2 weeks. I don't want to wait that long. In a few weeks I'll be getting a new rear tire installed by the dealer anyway. So I'll get him to order the Kymco belt and install it when he installs the new tire. I'll then keep the Bando belt as a spare. I know that's a lot of changes. But I want to ride now. Lol
Sent from my iPad using Tapatalk
-
Of course you want to ride now. No guilt. Go, burn up that road man!
Sent from my Samsung Note 3 with Tapatalk
-
Good plan Forbes!
-
From all respones on this forum....I purchased Kymco belts from Kymco parts houses which come sealed in a Kymco bag. Period. Too important a part to mess about with.
Top quality parts.
Stig
Mitsuboshi is a Kymco belt . for a downtown 300i, Bando is for the small CC Kymco scooters
-
My dealer recently installed a Malossi belt on my Kymco Like 200i. I'm hoping it service life is similar to the OEM belt. I'll keep the bb posted when the time comes to replace.
-
Installed the Bando belt today. So far, so good. I guess my old belt was worn or stretched the whole time I had it because my cruising Rpm's came down. And my top speed increased from approx 75 to 80+. Still planning on purchasing and installing a Kymco belt when I replace my rear tire fairly soon and keeping the Bando as a spare.
Sent from my iPad using Tapatalk
-
Kymco doesn't make belts, but the OEM quality is there from who ever. Might be Gates, Bando or ?.
-
Kymco doesn't make belts, but the OEM quality is there from who ever. Might be Gates, Bando or ?.
I think their belts are made by mitsuboshi for most of their scooters, or for mine anyway. I assume that the recently broken belt was the original due to the fact that my scooter had 5600 miles on it when I bought it and around 7800 now. The belt I removed had mitsuboshi writing on it.
-
Is your speed gps verified?
-
Is your speed gps verified?
Yes. The old top speed was GPS verified At 75 level ground. The new top speed is 82 level ground, no wind. But more significantly, my rpm at 65 mph went from 7500 (redline) to slightly below 70000, and if need be, I can go 70 mph at redline. Being able to cruise at 65mph with some reserve rpm's left over is MUCH MORE comforting.
-
Kymco belts are made by Bando and/or Mitsuboshi.
Both brands Bando and Mitsuboshi are perfect brands.
I have both brands on my shelf for spare parts. Wouldn´t buy anything else.
And just for your info: Belts don´t wear so much because of miles and remaining thickness, but much more because of heat! Many and long WOT rides are a bigger challenge for belts than many miles...
Keep that Bando belt , because Kymco IS Bando. ;)
-
Kymco belts are made by Bando and/or Mitsuboshi.
Both brands Bando and Mitsuboshi are perfect brands.
I have both brands on my shelf for spare parts. Wouldn´t buy anything else.
And just for your info: Belts don´t wear so much because of miles and remaining thickness, but much more because of heat! Many and long WOT rides are a bigger challenge for belts than many miles...
Keep that Bando belt , because Kymco IS Bando. ;)
Thanks for the information . I guess that's why mine failed less than 2000 miles after looking good when i checked it. I ride 3 or 4 days to and from work, weather permitting. It's 50 miles each way at 60-65 mph. When I bought it, it had over 5000 miles on it. When the belt shredded, it had nearly 8000. I don't know how the previous owner drove it. But I guess I can look forward to replacing the belt about every 5 or 6000 or so or when my rpm's increase close to where they were when I first purchased it.