KymcoForum.com
General => General Discussion => Topic started by: dfhgdfhdf on April 02, 2016, 05:10:12 AM
-
......
-
Drill 1/4 inch holes in the back of it. start with 1 at a time but no more then 3 or 4.. If you do this make sure its what you want. And yes you may have to jet up the carb......... 1 or 2 holes you may not have to jet up.....
No going back if you do this so make sure.
-
Not much detail, if FI then no need for adjustment in fuel system. Carbed a few holes no issue always can be plugged up again by threading in a bolt!