KymcoForum.com

Scooters - 50cc => zx50 => Topic started by: mudfreek on May 22, 2010, 04:05:50 PM

Title: any1 know
Post by: mudfreek on May 22, 2010, 04:05:50 PM
hey any1 know if they make a disk brake rear conversion for the zx 50
Title: Re: any1 know
Post by: sidthesloth on May 22, 2010, 05:21:06 PM
I dont, but it would be interesting to see.
Title: Re: any1 know
Post by: mudfreek on May 23, 2010, 06:29:49 PM
im looking for the rear disk set up cause i saw a yamaha aeroux and som peugot with rear disk any idea what kinda set up kymco cloned
Title: Re: any1 know
Post by: Shaka on May 24, 2010, 04:52:32 AM
The ZX50 is a Honda Dio clone.  There are no rear disc conversions that I'm aware of.  You may able to adapt the rear end of a Super 9 to work.  It looks like they have an arm mounted off of the engine where the exhaust mounts that extends back to hold the caliper.  Interesting idea!
Title: Re: any1 know
Post by: wordslinger on May 24, 2010, 09:09:44 PM
...there you go!!
Title: Re: any1 know
Post by: robmsz on June 19, 2010, 05:35:58 AM
I agree the rear brakes in the ZX-50 are mighty weak..
Title: Re: any1 know
Post by: zombie on June 19, 2010, 07:02:45 AM
Get the pads from scooter assassins  http://stores.ebay.com/scooter-assassins_BRAKE-SHOES_W0QQ_fsubZ233952619QQ_sidZ54837729QQ_trksidZp4634Q2ec0Q2em322 (http://stores.ebay.com/scooter-assassins_BRAKE-SHOES_W0QQ_fsubZ233952619QQ_sidZ54837729QQ_trksidZp4634Q2ec0Q2em322)   they will lock up, and I have had mine in for about 30,000 km
Title: Re: any1 know
Post by: mudfreek on June 19, 2010, 09:43:30 AM
thanks guys
Title: Re: any1 know
Post by: robmsz on June 27, 2010, 08:05:54 PM
Get the pads from scooter assassins  http://stores.ebay.com/scooter-assassins_BRAKE-SHOES_W0QQ_fsubZ233952619QQ_sidZ54837729QQ_trksidZp4634Q2ec0Q2em322 (http://stores.ebay.com/scooter-assassins_BRAKE-SHOES_W0QQ_fsubZ233952619QQ_sidZ54837729QQ_trksidZp4634Q2ec0Q2em322)   they will lock up, and I have had mine in for about 30,000 km

These are the $15.00 ones correct ZOMBIE ? Are they a HUGE difference or a mild difference?
Title: Re: any1 know
Post by: mudfreek on June 28, 2010, 10:49:55 AM
another question do they make a water cooled kit for the zx 50 i live in va and it gets freekin hotttttt here
Title: Re: any1 know
Post by: robmsz on June 28, 2010, 07:06:17 PM
I'm not sure if it was meant to run cool? It wiould run diff. I'm pretty sure. On the other hand if you have alot of mods....R U the one running hot and needed to kerf?

It might get HOT in VA. but many scoots run in So. Florida all year round and thats HOTT, HOTT, HOTT !
Title: Re: any1 know
Post by: mudfreek on June 28, 2010, 09:33:04 PM
i wouldnt say iys running excesivly hot i was just wondering
Title: Re: any1 know
Post by: zombie on June 29, 2010, 01:24:57 AM
I would have to say the difference is better than mild... but not as good as a disc. I used a "flapper wheel to run inside the brake drum, and set a cross hatch hone in it. The first time I applied the brake on one of my favorite turns, i over did it, and woke my arse right up! The shoes are definitely worth getting there. As for LC... It's not worth the effort in my opinion. You could always find a basket case LC scoot, and swap engines if you really want to go that route. I live in NW FL>, and it is F'ing HOT. My scoot has been here for 9ish years, and so far so good. If you think you are running too hot a Hi Flo fan can be gotten for under 20.00 bucks, and a colder spark plug can be used to lower the combustion temp. if needed.
Title: Re: any1 know
Post by: mudfreek on June 29, 2010, 10:29:40 AM
oops not running hot