KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: mikrron on May 15, 2010, 08:23:20 AM

Title: photoshop paint
Post by: mikrron on May 15, 2010, 08:23:20 AM

this is my kymco
stock and "painted"

(http://img202.imageshack.us/img202/4519/blackredblack.th.jpg) (http://img202.imageshack.us/i/blackredblack.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
(http://img156.imageshack.us/img156/1029/copyofimg1820.th.jpg) (http://img156.imageshack.us/i/copyofimg1820.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
(http://img35.imageshack.us/img35/9967/img1827ix.th.jpg) (http://img35.imageshack.us/i/img1827ix.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)


yesterday took me half a day to mount the pager alarm and not al wires are conected to the ignition switch. only the + is connected. to use the highjack function i need to put some wires to the off position. have any clue what wires go to off position in ignition switch?
(http://i.clubafaceri.ro/clients/24/81632/85/alarma-motocicletascuteratvquad-cu-pager-787582_big.jpg)

Title: Re: photoshop paint
Post by: yankee doodle on May 15, 2010, 06:01:26 PM

 ??? I bought me 1 also I havent a clue which wire goes where .When you have a clue of where every wire goes please let me know .The man wants 2 hours to in stall in at 72.00 clams a hour .so if I could get some help that would be excellent .Thanks Bro .Yankee . D

Title: Re: photoshop paint
Post by: scootergrisen on May 15, 2010, 07:14:03 PM

The off position must be the wires that is connected when the ingition is at OFF.

Look for COMB SW here :
http://scootergrisen.dk/scooterhjemmeside/download/agility_eldiagram.pdf (http://scootergrisen.dk/scooterhjemmeside/download/agility_eldiagram.pdf)

It says IG on one wire and E on the other.

E is green so must be earth.
IG goes to the pulser.

So when the pulser gets earthed the CDI dont get signal and scooter cant run.

It must be one of them.
Dont you have the manualen og a picture for us to look at ?

Title: Re: photoshop paint
Post by: mikrron on May 15, 2010, 09:23:37 PM

here is the wire from alarm and a photo of my contact switch (before mounting the alarm)
i added a little info in the picture the way my alarm is set now.

with 1wire wired to contact as it is now it recognizes the on position.
i don`t know what does the other wires pink and grey. blue goes to starter and i don`t want this option

(http://hosting11.imagecross.com/image-hosting-th-36/4228Poza-0050.jpg) (http://www.imagecross.com/11/image-hosting-view-36.php?id=4228Poza-0050.jpg) Click Image to Enlarge Image Hosting (http://www.imagecross.com/)

(http://hosting11.imagecross.com/image-hosting-th-36/2629Image1.jpg) (http://www.imagecross.com/11/image-hosting-view-36.php?id=2629Image1.jpg) Click Image to Enlarge Image Hosting (http://www.imagecross.com/)

Title: Re: photoshop paint
Post by: zombie on May 20, 2010, 12:50:43 AM

The easiest way to tell is to use an Ohm Meter from the green wire to any of the others on the switch. Eliminate the ones you know, and read for a dead short w/ the key off. Turning the key on will open the circuit you want.