KymcoForum.com

Scooters - 125 to 300 => People 150 => Topic started by: Lammy1000 on April 19, 2010, 09:08:35 PM

Title: People 150 Stalls at Cruise Speed
Post by: Lammy1000 on April 19, 2010, 09:08:35 PM
My new scooter started stalling since taking ownership.  It will start and run great, except every 0.5 to 8 miles it will stall.  After coasting to the side of the road (Very Dangerous Situation) it will restart and run fine till the same thing reoccurs.  I tried riding without fuel cap and adding carb cleaner (Seafoam) without success.  After 80 miles it is back at the dealers.   

The dealer is working on it, considering the magneto.  I read of a guy who had this problem which turned out to be a bad CDI. 

Before returning it to the dealer with 80 miles on it I verified there was not a vacuum occuring in the tank by riding w/o the gas cap...still stalled then restarted.  Seafoam was added to fresh gas and no improvement.
Title: Re: People 150 Stalls at Cruise Speed
Post by: Lammy1000 on April 20, 2010, 09:38:34 AM
Has anyone else had this problem or am i the only a$$hole to get a lemon???
Title: Re: People 150 Stalls at Cruise Speed
Post by: zombie on April 20, 2010, 01:33:26 PM
I posted on the other thread that I believe it is the stator, or the cdi. The stator is easy to verify w/ a multi meter, and if it passes the tests... the cdi would be the culprit. I have had both go too many times on too many scoots to not recognize it. Either way it should be a warranty job!
Title: Re: People 150 Stalls at Cruise Speed
Post by: Lammy1000 on April 24, 2010, 09:02:17 PM
This may interest scoot owners:

http://kymcoforum.com/index.php?topic=2023.0 (http://kymcoforum.com/index.php?topic=2023.0)