KymcoForum.com
Scooters - 50cc => Super 9 => Topic started by: reallypfc on April 10, 2010, 01:14:47 AM
-
my super 9 was stolen in december,1 day after i got back the repair shop.i happened to stop in today to get a throttle cable holder which brole on my jmstar....lo and behold he tells me ~some guys~ just dropped of this super 9 a few months ago and wondered if it was mine....i went in and told him 2 days after it was stolen to be on the look out for it but for reasons unknown yet known ...he never called...been sitting in hi showroom the whole time
any way the thiefs ripped off the front bezzle and fubared the wires on the ignition switch ....i need to get a new one .that i understand
what gets me though is that battery was out and the cdi is missing.....it appears to me that he used it for some other bike which pisses me off even more
my questions are
1)can i use an aftermarket cdi and if so what brand honda qants 90.00
2)need replace front bezel...any parts places you know that might have one
its a 2006 watercooled front rear disc brake model....thanks...len
-
Hey Len. That is one "F"ed up story! The parts shop I use is http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx (http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx) They have a lot of praise on this forum. Mention the forum to them when you order. The cdi can be ordered direct from Suitai http://www.motorcycle-components.com/ (http://www.motorcycle-components.com/) They will program the cdi w/ NO restriction for you. They are the manufacturer that Kymco uses. The site has 2 contact #'s. I use the Tiawan #. Getting thru in English may take a moment, but it is well worth it. My zx cdi was 39.99, and $20.00 shipping to Florida.
-
They will program the cdi w/ NO restriction for you
can you explain this to me further ...also was wondering if there is a link to a 2006 super parts manual so i can start checking on the cosmetic stuff i am going to need
thanks agai for your help
len
-
can you explain this to me further ...also was wondering if there is a link to a 2006 super parts manual so i can start checking on the cosmetic stuff i am going to need
thanks agai for your help
len
..what zombie was saying, is that if you order a cdi from Suitai, they program it without the rev limiting restrictions that are common to most 50cc scooters..the restrictions are normally put in place to kep the scoot's speed and rpms below a certain level...this is done to comply with speed laws that limit 50cc scooters to say, 35 mph...
"http://www.timtaylor.net/Scooter/Manuals.htm" towards the bottom of that page is the Kymco section. The S9 manual is there.
peace
-
And this site will give you the parts breakdown w/ the prices. It is the shop alot of us recommend from the forum. My favorite for oem parts. http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx (http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx)
-
couple of more q's
how do you pay the guys in tawain
and how long does were does it take to get here
-
G'Day Reallypfc, I am in Australia and the bits that I get from Taiwon I pay with pay palg, you could do a bank transfer if you would prefer, or credit card which I would not. I think about 2 weeks wait, not such a small world yet. All the best with your scoot.
-
I gave them a debit card! They are a bit too big for Paypal. 2 weeks is spot on. Where are you located? Mine was 2 weeks to Florida USA
-
i am in wilmington nc...so it should not be that muh of a wait,,,,thoughts are of just
a)getting original from loal honda kymco dealer along with new lock mech and see if it will start....then worry about cosmetics
b)ordering and working with http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx (http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx)
local honda/kymco shop wants 90 for the cdi and 60 for the ignition
switch assembly
-
Whoa! Dude, Search Ebay for the lock set up. When I first bought my scoot I had lost the key, and found a complete lock/key set on ebay for $16.95, and 8 bucks shipping. I was looking at those two wheel 50cc skateboard scoot things, and it was just in the page. It was a big company w/ lots of merchandise. If you can put the scoot on the back burner for 2 weeks or so you can get the cdi, and the lock set for less than just one of them local. Ps The lock set was the EXACT SAME AS THE FACTORY SET.
-
since it is a 2006 water cooled ...loal honda sho p went nuts on cdi price..ordered from http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx (http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx) and sved about $150 bucks
just waiting for parts to ome in ( may 3rd to 14th) ...then the fun starts
will be looking for cosmetic front end parts if it starts ..used is aok if any one knows ...btw thanks for all the help so far
len
-
Have you tried searching Ebay? Try looking at the used parts, and follow the links to the sellers store. I found loads of used parts that were not listed by contacting the sellers. Many of the used parts guys are actually salvage yards that part out scoots as they get them. Keep us informed how it goes! I Love the S9.
-
i am in wilmington nc...so it should not be that muh of a wait,,,,thoughts are of just
a)getting original from loal honda kymco dealer along with new lock mech and see if it will start....then worry about cosmetics
b)ordering and working with http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx (http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx)
local honda/kymco shop wants 90 for the cdi and 60 for the ignition
switch assembly
I've got a spare nose cone, CDI and lock set if you're interested. The key is slightly bent (insurance job), but it works. Nose cone isn't super pretty. I have a scratched red one, a decent shape grey one (off an 07) with damage to the decals, and an orange one with a few scratches on it.
e-mail josh@thescootergarage.com
Sucks about the theft. Any time someone brings something to my shop that is questionable I let them know that I will have the police check it. Caught one so far out of several, but most of the time police don't have reports because people don't keep the VIN on hand. Last one I reported they couldn't do anything about because there was no report. Kinda silly huh?
~Josh
-
That is the single biggest draw back to no tags in N.C.. I bought mine third hand, and no title. The Police Chief is my friend, and neighbor. I ask him to run the vin so I could get the title thru the original owner. Guess what! The vin I mis read, and quoted to the Chief turned up STOLEN in NEW JERSEY. That one was blue, mine is green (factory plastic) He came over, and got the correct #'s off the frame, and saved me a whole lot of embarrassment. Bottom line is I think all states should at least Reg. to protect US from THEM!
-
...i wouldn't mind the registering part...as long as we don't start requiring a valid NCDL...
..i'd have to break the law just to get to work and back...
-
Come on slinger... What's one more gonna do?
-
...good point...rebel without an option....
-
What we have here is a failure... to communicate! What yo en fo my man? Er... Uh... Mmmm! scootin' w/o a license, and I killed the guy that pulled me over! With a dried up squirell! Yeah That's the ticket!
-
...i could get my dl now...but my insurance would be over $300.00 a month...
....sssso......
:-\
-
I've got a spare nose cone, CDI and lock set if you're interested. The key is slightly bent (insurance job), but it works. Nose cone isn't super pretty. I have a scratched red one, a decent shape grey one (off an 07) with damage to the decals, and an orange one with a few scratches on it.
e-mail josh@thescootergarage.com
up and running as of today....getting the new ignition switch on was a PIA ...i do not think the guys ever got started as the 15 amp fuse was blown
left josh a pm and email email for a new front end...they busted out the whole side to get to the wires
oh well ... while not as fast as my jmstar b09 (150) its a hell of allot smoother ride.
cant wait to take it to work tomorrow
thanks for your help
-
Awesome! Keep us informed Bro!