KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: marioG on March 31, 2010, 08:44:06 PM

Title: Instrument lights
Post by: marioG on March 31, 2010, 08:44:06 PM

 ;D

How many bulb and which kind are going into?

dont wanna open it up 2 times....

guess is 3 x T10??

Title: Re: Instrument lights
Post by: zombie on April 01, 2010, 02:44:24 AM

If no-one else gets it for you I thinl the service manual has it. If not a call to the Dealer (yuk)

Title: Re: Instrument lights
Post by: marioG on April 01, 2010, 07:56:41 PM

got kymco.pdf manual but nothing in it....

only want to change color to blue...

Title: Re: Instrument lights
Post by: zombie on April 01, 2010, 09:56:18 PM

Most hardware stores have a Vinyl dip compound in 1/2 pint, or quart cans. It is made for dipping tool handles into. It comes in a 1/2 dozen colors, and I have used it in the past on hot rods, and the like for cool color effects on all sorts of bulbs. Just dip the bulb once, and let it cure. 

Title: Re: Instrument lights
Post by: Shaka on April 01, 2010, 11:15:10 PM

I don't for sure on the A125, but on my ZX50 there are two bulbs.  I put blue ones, they were actually cheaper! 

Title: Re: Instrument lights
Post by: marioG on April 03, 2010, 11:27:08 AM

bought 2xluxeon 1w blue and 5w 33ohm resistor.....

gona try...

Title: Re: Instrument lights
Post by: marioG on April 05, 2010, 05:29:30 AM

Thanks all,

Shaka was wright. Kymco uses 2xT10 for instrument bulbs, plus 3xT10 for else on board. No matter which scoot that age.

I used 2x white wide led for cars. Got no room for soldering. Also solder blue ones luxeon on parking lights, and that looks beautiful.

Going to post a picture...later