KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: Gravzy on March 18, 2010, 01:55:09 PM
-
Hey all recently got a kymco 50 2006 and have looked at derestricitng it but have a problem as the CDI in my scooter is off a SYM Symply ??? so have looked at replacing this with an original CDI to do the cut on the CDI however i can only seem to find a 125 CDI forsale locally anyone know if this would work the same?
-
...the symply, and the agility are fraternal twins...could you post a pic of the cdi and wiring harness?
..oh, and welcome to th forum!!
peace
-
(http://C:\Users\helen\Pictures\18032010021.jpg)
hope this helps
-
try again didnt seem to work
-
...that appears to be the same as mine...
can you get a full pic of the cdi itself?
-
struggling with camera at the moment however it is the same size and shape as the standard kymco ones
-
..i would suspect that you can notch the cdi just as the agility...
-
have tried the cut however i have got 3/4" into the cdi at a 45 degree angle and have hit no wire i dont wanna go to deep incase of damaging it
-
...this is what the dealer did to mine...
..have you checked the variator boss?
-
yeh mines like that now however no change has come of it have changed the boss purchased one without the lip and did this myself.
-
..wat is your top speed now??
-
about 38 on a good enough stretch of road
-
...flat road, 38 ain't that bad...what about downhill?
-
struggles like hell maybe 28 luckly for me only one or two hilled bridges near me for it to worry about do you know if jetting it without an aftermarket exhaust would help?
-
struggles like hell maybe 28 luckly for me only one or two hilled bridges near me for it to worry about do you know if jetting it without an aftermarket exhaust would help?
...28...downhill??
-
ohh downhill sorry in tha case touches 40
-
...hmm..without knowing what jet you currently have...its hard to say...
..a free-flow air filter will help some..then you would need to re-jet...
..the biggest performance increasing mod i made was a Malossi Multivar variator, which comes with a white "1000" main torque spring...
..that put me up to 50 mph indicated right outta th' box...
..though i'm now running 4.7 gram rollers instead of the stock 6 gr...
-
...have you checked your tire pressures?
..i know that may sound obvious, but these scoots are sensitive to tire pressure...
..I still have the stock exhaust on my 08, and so far, even with all my other mods, it's worked out ok...
..as for your cdi, try "http://www.stadiumyamaha.com/pages/parts/viewbybrand/73/0/432/3/default.aspx"
..their part # for the cdi is 30410...
-
The link was fantastic thanks till it came to the shipping cost with me been in the UK it was $98 to have it shipped what a JOKE haha!
-
Wow! I'm sure myself or one of the others wouldn't mind boxing one up and shipping it to you! It's gotta cost less than $98 to do it that way!
-
It cost .98 to send a carb needle to Australia. Have you tried kymco uk? http://www.sip-scootershop.com/dealerlocator/Default.aspx?_language=EN (http://www.sip-scootershop.com/dealerlocator/Default.aspx?_language=EN) Or sip?
-
mmmm I got mine by just cuting a 1/8 slot in the box nothing like that and I get 42 to 48
miles ahour. try that maybe not cut deep enough.
-
It cost .98 to send a carb needle to Australia.
Thanks zombie, when it gets here I will give it a try.
-
I'm surprised you haven't gotten it yet! Well should be any day...
-
My shop said they did the cdi for my scooter today, and i don't notice any difference whatsoever. Anybody know if that seems right?
-
Not right ...UNLESS... there is something else not allowing your scoot to get to top rpm's . Try a down hill run, and see if the engine sort of studders. It should just keep pulling, and not hesitate. Can you post picts. of the cdi? In the scoot?
-
yeah, ill post flix. i would try to go downhill, but there are no hills here in new orleans.
-
N.O. Bro you are at the bottom of the hill. No wonder it seems slo... Everything from you is up! Just messi'n man. Post the picts. of what you have, and it will get sorted out. Ps Bro! The Saints Friggin' ROCK!!!! I would LOVE to see Dallas vs. N.O
-
so i just took pictures of the box, but my girlfriend lost the cord to my camera. it looks like the person cut two slits in it. i thought there was only supposed to be one???
-
(http://i233.photobucket.com/albums/ee158/jembibbs/-1-1.jpg)
heres a picture of a picture. sh**ty quality. too lazy to go back outside.
-
No Doubt. I hate posting picts. Look REAL close at/in the cuts. Can you see a TINY wire in there? If not continue the cut w/ a hacksaw blade until you can.
-
what color's the wire? i'll check it out tomorrow, gotta get some sleep. thanks for the help. i'll be back.