KymcoForum.com

Scooters - 125 to 300 => People 150 => Topic started by: sw19 on February 18, 2010, 02:13:51 PM

Title: Installing new exhaust
Post by: sw19 on February 18, 2010, 02:13:51 PM

Has anyone installed an exhaust pipe on their People? Is access to the bolts attaching to the engine easy to get to or, do I have to remove any body panels?

Title: Re: Installing new exhaust
Post by: zombie on February 18, 2010, 10:17:48 PM

There may be a service manual here. If not surf canyon as a search engine can get you to one.http://www.timtaylor.net/Scooter/Manuals.htm (http://www.timtaylor.net/Scooter/Manuals.htm)

Title: Re: Installing new exhaust
Post by: smoke eater on February 19, 2010, 04:34:34 AM

I intalled a new exhaust on my P150 last year.  If you go to the thread titled "Jet size" there are a couple of pictures there.  The exhaust bolts do not require you to take off any body panels, but you will have to lay on the ground a bit.  They are a standard size (10mm I think) but are pretty long.  One tip, there is a metal gasket that is part of the system, make sure you get that and if it is not damaged, you can use it for the new exhaust.

Smoke Eater

Title: Re: Installing new exhaust
Post by: sw19 on February 23, 2010, 10:17:01 PM

Thanks. All I had to do was remove the small panel down by your feet. Gave me a view so I can see the two exhaust bolts. Entire job took 10 minutes.

Title: Re: Installing new exhaust
Post by: zombie on February 24, 2010, 12:30:48 AM

Very nice! What did you replace it with? Stock?

Title: Re: Installing new exhaust
Post by: sw19 on February 26, 2010, 08:11:43 PM

Quote from: zombie on February 24, 2010, 12:30:48 AM

Very nice! What did you replace it with? Stock?

Stock pipe.

Title: Re: Installing new exhaust
Post by: CoolSoupy on July 03, 2012, 12:15:10 PM

Did you find an aftermarket exhaust? Kymco is too expensive.

CoolSoupy :-[