KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: Kymcoagility50 on February 10, 2010, 07:07:51 PM
-
Okayy i brought a kymco agility 07 bike for 600pounds, its got amazing monster energy graphics the bikes a stunner !! but only goes 36:/ soo thought mmm have to do something about this soo come on to this great forum and it helps alot !! but not quite ennough for my stiupidness :) looked at a few pictures and still really do not understand how to cut, where to cut and when too stop, Soo took off CDI its a black square box with big one box arttached to end with "big green wire" "half black half yellow wire" "hlaf blue half yellow wire" and "half blue and half black wire" PLEASEE can anyone help mee, many thankss :) ohh and if my ped goes 36mph atm the minute what could this de-restriction boost this too :)
Many thanks
KymcoAgility 50
-
..okay...you're definately at the right place...
..can you take a cpl pics of your cdi and post them here?
..the posts in the "Kymco agility 50 07 de-restriction" thread in this board are pretty much straight forward...
..however, we need to verify what cdi you have in your scoot...
peace
-
hi wordslinger :)
i lost the lead for my phonee but its just a plain black rectangle, with "big green" one annother is "half black half yellow" the other two are "hlaf blue half yellow" and "half blue and half black" there the colour of wires and theres a white box attached to it.. :/
anychance of helping without pics :/ im not sure if it spossible to get them on sorry
Many thanks
KymcoAgility50
-
..okay, sounds like the standard stock cdi wiring...it's the same as mine anyways...
..if you will look at the "Kymco agility 50 07 de-restriction" thread i mentioned in my previous post, there are a cpl of pics...
...just make a small 1/4" deep, Vee-shaped notch like the pics show...
..you won't hurt the cdi if you just copy what you see in the pics...
..there is a tiny wire encased in the edge of the cdi...making the little notch will cut this wire, and inhibit the electronic rev-limiting feature...
..this simply allows your engine to run faster...
-
so its simple ?? if i use a square file will tht do the job ?
-
.should work just fine...
;D
-
thankyou very much wordslinger :)
if this goes wrong wht will it cost me ? in pounds ?
-
...you won't hurt it...dunno what it would cost, but just copy the pic...you'll be ok....
..small little notch..
:)
-
just notch mean cut :s ?
-
...yup...about 1/4" deep...there is nothing else in that area of the casing except the tiny wire about 1/16" below the edge...
-
..if you look in the "CDI" thread in this nboard, there's a pic of my cdi...my dealer did that for me...so you can see that there is nothing else in that area to damage..
-
does 1/4" mean quarter down box ?
-
Here's the page w/ the picts. You will get 10-15 mph top end increase. http://kymcoforum.com/index.php?topic=1142.0 (http://kymcoforum.com/index.php?topic=1142.0)
-
mine isnt a r12 thoughh
-
This page has a pict of the cdi for your scoot. Is this the same as what you are describing? Sounds like you are looking at a different part to me. Slinger, could you post a link for the service manual for his scoot? maybe it will be easier to figure out if there are some picts. http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx (http://www.stadiumyamaha.com/pages/parts/viewbybrand/default.aspx)
-
I found a link to the service manual. Under the description is the word HERE. That is the download. http://www.freeebookpdfmanual.com/motorcycle/kymco-motorcycle/kymco-agility-50-service-manual/ (http://www.freeebookpdfmanual.com/motorcycle/kymco-motorcycle/kymco-agility-50-service-manual/) Post back, and you will be reving in no time
-
Agil from Croatia started the thread "Derestricting your Agility CDI"
back on April 13, 2008. Urbestfriend used this thread and commented
on how I did mine. The explanation is clear. However, don't expect
a gangbuster increase in power or performance. As I said back then.
I think I went from 40 to 47 mph. But a lot depends on if the wind is at your back
or not. I never went with any other mods. We still have that bike.
-
The best part is that 7mph is free!
-
Why Yes...That's very true and I'm glad I did it.
The extra boost is helpful on busier roads.
-
mine isnt a r12 thoughh
...what is your scoot then?...r16?
-
i just no of it as kymco agility 50 standard
-
...that would be an r12...12" wheels...
..r16 has 16 inch wheels and a different cdi...
-
The best part is that 7mph is free!
...free is goood...