KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: customx22 on February 03, 2010, 09:29:09 AM
-
I current run 7gram Dr.pulley and they scream.i just bought 9gram Dr pulleys but didnt try them yet. Do you think thats to high of a gear ratio for the motor to pull?
-
I run 9 gr Dr Pulley sliders in my 72cc ZX50. I think they are a bit heavy, but I've been very happy with them!
-
Just to give you a FLIP SIDE of that coin. I run 5.5gr Malossi rollers on the same scoot as shaka. I do want to try the Dr. Pulley sliders, because I here only Positive results w/ them. I just don't want to start tunning again. I'm pretty good w/ the rollers. I run about a year w/ them, and maybe there's better, but for now!
-
what do agility 50 with bbk run.what roller what grams. and wordslinger doesn't your scooter scream in top end speed with the 4.7? what rpm do you reach?do you hold it at full throttle?
-
...yeah, 4.7 gr works great for my scoot...i dunno what my rpms are...no tach...but i have seen my speedometer needle on the white, tenths digits on my odometer...it's wound out pretty good by then...
-
..yeah, 4.7 gr works great for my scoot...i dunno what my rpms are...no tach...but i have seen my speedometer needle on the white, tenths digits on my odometer...it's wound out pretty good by then...
are you using your stock torque spring?ok thank i'll probley go with 5gram Dr. pulley weights
-
...nope...got a white, 1000 Malossi main torque spring...
-
what do agility 50 with bbk run.what roller what grams. and wordslinger doesn't your scooter scream in top end speed with the 4.7? what rpm do you reach?do you hold it at full throttle?
..i know no other way... ;D