KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: wordslinger on January 31, 2010, 10:41:58 PM
-
...1.5" body lift kit....
..waitin' on the paint to dry, then gonna install it...
-
Cool! Did you make that?
-
..making as we speak...had to square off the inside of the clevis....
-
..finished product...NOW i'm waitin' on th' paint...
..i saw one of these in an earlier post here...thot i'd make me one...
-
Please be careful w/ front end geometry. Hard pack is one thing, and "dimples" in the road are another. Get used to it, before you start running hard. Wanna see you post from home, not the Hospital.
-
..woop..there it is...
-
Whoa! That looks like it made a big difference! Looks like it did more than a 1.5" between the wheel and body, probably more like 2.5" or more actual. I'm sure it will handle much quicker now with the steeper head tube angle! Looks good, keep us updated on the changes in handling!
-
...the guy that did this earlier claimed it handled better...
..imma see tomorrow...roads are a slippery mess right now..
..i umm..tried to play around in the parking lot today...couldn't even hold a straight line...
..the snow was okay, but we only had 1/2" of snow on top of 3 inches of ice, on top of 2 inches of snow...
-
I have been looking for a longer, more progressive rear shock. There are dozens to choose from, but how do you know which one is right w/out trying. Thought about the spacer, but it wont change the rate. (very cool though).
-
...okay, so it's my opinion that agil (the original extender idea-guy) was spot-on...
..the first thing i noticed was the view!...amazing the difference..like stepping into a pair of platform shoes....
..agil's was what looked to be 1", and my version actuallyraises the seat 1-5/8"..
..cornering responsiveness quickened significantly, and I have experienced no ill effects whatsoever..
..really wound her out yesterday, on some swoopy, curvy roads..I really like the feel the scoot has in the turns..it feels more confident...
..awaiting my Avon Viper Stryke rear tire...ordered it two days ago...that's going to be the real test..
..i'm kinda like shaka, there's a cpl of curves that i haven't been able to take without dropping the throttle back...almost made one of them yesterday, but i chickened out...
..final word on the lift kit is that it's a permanent addition to my scoot...just one more free mod that made things a little bit better...
peace
-
That's good to hear. Mods are always better when they are just about free. The taller tire gave almost the same result on the zx.
-
That's great! I think you will really like the Avon on the rear as well, I know I love them! I noticed the larger size tire in the rear did make a difference in the handling as well. It probably steepened the head tube angle by a degree. Slinger you got me a little curious about making a lift for mine as well, especially after the positive review! I also had some extensions welded to the feet of my center stand to raise the rear tire off the ground. I haven't had a chance to re-mount it, but it looks like it will work perfect! I kinda like not having it on there because I don't have to put the scoot on the center stand to use the kickstart so I haven't been that motivated to re-install it.
-
..yeah, i've been running a 130/70-12 on the rear all along..
..i too added some to the bottom of my center stand...
..all i did was cut two 1" X 1" pieces of thinwall square tubing..
..welded them to the feet right there on th scoot..lol..
..when I get 'm painted, i'll take a pic...
-
What is this CENTER STAND you's guys is talking about? I have a side stand. Just messing!?!>
-
...lol..see that stand that my scoot is balancing itself on...that's the center stand....
..where'd urs go???
-
Slinger- I was thinking about putting my center stand back on today and it got me thinking about this thread. Is that adapter you made steel or aluminum? Looks like aluminum, but I was thinking about strength vs. machinability. Also, I noticed the block of wood under your center stand, what's that about? I thought you had welded some extensions on?
-
..i machined the lifter from 1" square coldroll steel..took about 3 hours in all...
...that's a block of brass under my stand, and that pic was taken before i made them..
..my extensions are just one inch long pieces of 1" square thinwall (1/8"), cold-roll steel tubing, that i welded to each of the stand's feet...
..welded them with the open ends up and down when the stand is in the retracted position..so any dirt will tend to just fall out..
..haven't had time to paint them yet, or i'd take a pic....lol..
-
That just reminded me. . . I have to paint mine before I put it back on! ;D I think I may tackle this lifter fabrication some time in the future. I was thinking about making it out of aluminum though, it would be much easier and save my tools! I'm still trying to source some 7000 series aluminum plate for another project, so I may just get some square stock while I'm at it. For that matter, anyone know where I can easily get some 7000 series aluminum sheet? I need a minimum of 9" X 9" X 3/16".
-
I threw it out after putting the 130 on the rear. It didn't hit the ground.