KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: keith.brett1021 on November 16, 2015, 05:16:27 AM

Title: Unrestricted but still restricted?
Post by: keith.brett1021 on November 16, 2015, 05:16:27 AM: I have changed out the variator plus new rollers, unrestricted boss and a unrestricted cdi. However it only goes 38mph still? I read with those mods I should be able to hit 45-50mph.

Any help would be appreciated.

Thanks!
Title: Re: Unrestricted but still restricted?
Post by: thebatman on November 16, 2015, 05:22:53 AM: Quote from: keith.brett1021 on November 16, 2015, 05:16:27 AM
I have changed out the variator plus new rollers, unrestricted boss and a unrestricted cdi. However it only goes 38mph still? I read with those mods I should be able to hit 45-50mph.

Any help would be appreciated.

Thanks!
Hey man, what rollers are you running??
Sounds.like you need to play with the rollers more and plus jet that carb........

Sent from my SM-N920P using Tapatalk
Title: Re: Unrestricted but still restricted?
Post by: blue on November 19, 2015, 03:40:39 PM: Yes sir you need to up the jet to a 82 main jet.i
Title: Re: Unrestricted but still restricted?
Post by: aaron8 on December 28, 2015, 10:50:39 PM: 38 is normal with drive boss and 82 jet.
Title: Re: Unrestricted but still restricted?
Post by: JJJoseph on March 26, 2016, 09:37:24 PM: Quote from: keith.brett1021 on November 16, 2015, 05:16:27 AM
However it only goes 38mph still?

38mph is about all you'll ever get with those few mods. Rollers will make no difference. At 38mph, yer done!
Title: Re: Unrestricted but still restricted?
Post by: motman on April 10, 2016, 09:41:53 PM: 44 mph is probably all you will achieve without a big bore kit to take it to 90 or 100cc. Variator weights won't make a lot of difference, try 5.5 to 6g. You will need a #88 main jet. Fit 2000 rpm clutch springs as well to get much better take off. Less than Â£5 for the set of 3. Is your air filter clean?