KymcoForum.com
Scooters - 50cc => Super 9 => Topic started by: Raindrop586 on November 10, 2015, 11:02:13 AM
-
Does any one know what size and were i can get the coolant nipple mine didnt come in kit . and a pic of some porting i started.
-
I had to use my stock one for my cheap bbk. Be careful, though if you decide to take that route. They break easier than you'd expect. I had hell with mine after.
And I searched many local hardware and automotive/motorcycle stores and couldn't find anything like it. I ended up using some kind of t fitting that was heat resistant. And I was REALLY careful.
Good going with the porting. I never messed with that. I haven't read up enough about it to trust myself not to mess it up.
Sent from my VS985 4G using Tapatalk
-
Wait, that's the big one, right? From the pump? I just unbolted mine from the stock cylinder. A little tight, but was perfect.
Sent from my VS985 4G using Tapatalk
-
Dude you're a f****** genius thank God I still have my stock cylinder
-
Lol, glad I was able to help. I didn't even put any kind of sealant or tape on the threads and it never leaked for my.
Sent from my VS985 4G using Tapatalk
-
Shes coming along slowly but surely. Last thing on my list to order is the race kit for delta clutch . has the black springs in it . its like 6,000 rpm launch lol but in future i plan on doing a stage 6 kit . but im good for now . i also painted the rims flat black . and plan on body wraping it black carbon vinly . inside stays blue or white idk yet .
On another note i ditched that manual water pump . When you guys get time take your cover off and just try spining it with your fingers look how much resistance it is when u spin it . you can get a 12 volt water pump for around 40 bucks on eBay and even child can run on and off switch lol
12V aux water pump i got a Benz one ;) bosch makes it
Look up toyota pirus 12v water pump they work to.