KymcoForum.com
General => Technical | How To => Topic started by: Rbj on October 28, 2015, 10:22:42 PM
-
I need to know what I would need to upgrade to use a 70 cc instead of a fifty also info on where to find vin decoder
-
You didn't say if it's a 2-stroke or a 4-stroke. Kymco uses different names in different countries, so some of us don't know what an Agility is.
-
It's a four stroke
-
Best think for the agilty is to do the full 70 kit that has the crank and all in it. it is a 50cc that you are trying to make go faster . I have seen so many blow.Because the crank was not added to the kit.good luck. if ya want better just buy a new motor for it .like a 125 will bolt right up to that frame.or even a 100cc .
-
If I were to get the 125 what other upgrades would I need
-
If I were to get the 125 what other upgrades would I need
[/quote
If you stick with a kymco motor almost nothing..but if you go with a gy6 motor. switch out the stator and you should be good.
You will need the carb. and back tire.and muffler.
-
if you do not have good tool kit and experiance of changing engines over ,,,do not try ..
-
Heard .